' WHEELS & TIRES '!!!
07-05-2002, 09:42 PM
#81
Banned
Thread Starter
iTrader: (1)
Join Date: May 2002
Location: The GYM!
Posts: 9,881
Likes: 0
Received 0 Likes
on
0 Posts
EXCELLENT observation and post MfM3! 
And you yourself stated exactly what other plans I have for my Z should there be a clearance issue. As with my GS, I lowered it 1.5 inches to compensate for not only "visulal appearance" but more importantly, handling and less body-roll. I also added front & rear braces (strut & chasis) which the Z already has. 
It is my hope that the Z's factory suspension will accomodate my 19's if not, hello Eibach. 
And you yourself stated exactly what other plans I have for my Z should there be a clearance issue. As with my GS, I lowered it 1.5 inches to compensate for not only "visulal appearance" but more importantly, handling and less body-roll. I also added front & rear braces (strut & chasis) which the Z already has. It is my hope that the Z's factory suspension will accomodate my 19's if not, hello Eibach.
07-05-2002, 09:50 PM
#82
All we need is an offset....
I believe Nismo is going to be offering a set of 1" lowering springs for the G35, so the wheel gap problem hopefully won't be an issue. I have to stick with 18"s since I live in New Jersey, home of the worst roads in the Union.
I believe Nismo is going to be offering a set of 1" lowering springs for the G35, so the wheel gap problem hopefully won't be an issue. I have to stick with 18"s since I live in New Jersey, home of the worst roads in the Union.
07-06-2002, 09:11 PM
#84
I don't know if this will help you, but Doug Stewart (owner of Crawford Z Car Service in Nashville, TN) noted the first thing he would do is put spacers on, to push the wheels out even more towards the corners. I think this comment reassures me that a pretty wide tire could go on the back. I don't know much about wheels and such but I hope this helps.
07-07-2002, 01:44 AM
#86
Charter Member #84
Join Date: May 2002
Location: Bay Area, CA
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
I emailed gtautosports.com about pricing on a particular wheel, and I also asked if they knew what the fitment specs were going to be, they responded, confirming 114.3x5, didn't give offset though. Hopefully he didn't say this just because it's the standard, but that's what the measurement will really be. Also, is using spacers a good thing to do (no problems caused)? Forgive my ignorance, but I've only bought one set of aftermarket wheels and they fit right out of the box.
07-07-2002, 01:46 AM
#87
Charter Member #84
Join Date: May 2002
Location: Bay Area, CA
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by JameZ
Hey TXSTYLE nice rims on ur Lex what kind is it and what size?
Hey TXSTYLE nice rims on ur Lex what kind is it and what size?
07-07-2002, 01:56 AM
#88
Banned
Thread Starter
iTrader: (1)
Join Date: May 2002
Location: The GYM!
Posts: 9,881
Likes: 0
Received 0 Likes
on
0 Posts
TIRE & RIMS
Originally posted by JameZ
Hey TXSTYLE nice rims on ur Lex what kind is it and what size?
Hey TXSTYLE nice rims on ur Lex what kind is it and what size?
07-07-2002, 02:06 AM
#90
Banned
Thread Starter
iTrader: (1)
Join Date: May 2002
Location: The GYM!
Posts: 9,881
Likes: 0
Received 0 Likes
on
0 Posts
How about this nice setup! 
This is what I want my Z to look like as far as appearance and stance! 
You feelin' me!!!
This is what I want my Z to look like as far as appearance and stance! You feelin' me!!!
Last edited by TXSTYLE; 07-07-2002 at 10:35 PM.
07-07-2002, 03:36 AM
#91
Originally posted by TXSTYLE
How about this nice setup! This is what I want my Z to look like as far as appearance and stance!
You feelin' me!!!
How about this nice setup!
This is what I want my Z to look like as far as appearance and stance! You feelin' me!!!
Seriously though, nice setup; it looks like you're throwing 20"s on there. Can you photoshop my secret rims?
Someone bring me the offset info so I can bring the secret rims when I pick up the car!!!
07-07-2002, 03:46 AM
#92
Guest
Posts: n/a
Hey TXSTYLE... I have never really considered buying rims for a car until I ordered my new Z and I was wondering if you could give me some suggestions on which types of rims to get since you seem to know a great deal.... I wanna fit either 19 or 20's on it and I was wondering you knew some that you can recomend me to... I like rims that looks nice'n sleek don't really have to be racing rims I want the look that looks catches the eye and goes along with the car... if you could help me out it would be great! Thanks TX!
07-07-2002, 05:34 AM
#93
Registered User
Join Date: Jul 2002
Location: Diamond Bar
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Hey sup everyone! first time here ... ya because of this, i post my reply at wrong place........ sorrie 
!
gotta question for TXSTYLE or anyone that knows! Do you know where i can buy a set of wheels made by MOMO? Thanks! (i attached a pic of that, and i think it looks cool!
)
!gotta question for TXSTYLE or anyone that knows! Do you know where i can buy a set of wheels made by MOMO? Thanks! (i attached a pic of that, and i think it looks cool!
)
)
07-07-2002, 07:56 AM
#95
Charter Member #84
Join Date: May 2002
Location: Bay Area, CA
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by TXSTYLE
You feelin' me!!!
You feelin' me!!!
that's it, I'm gonna have to upsize to 19s! maybe even 20s, I dunno. I would have to look into lowering the car too I think.
Last edited by blackSunshine; 07-07-2002 at 08:01 AM.
07-07-2002, 03:30 PM
#96
Guest
Posts: n/a
I like this thread. Good to see TXSTYLE is a moderator. I remember reading he is lobbying JMANZ for a dedicacted wheel and tire section on this site. It would be great to have a few photoshop experts get interested in this topic. VQracer's link is very useful when plus sizing. www.miata.net/garage/tirecalc.html
I'd like to see the 19" Moda R6's, that TXSTYLE has on his GS 400, photoshopped onto the Z. Haven't done a lot of research, but looking at tirerack's selection of 19" wheels that fit the G35 (350Z fitments not yet shown), I like both the Moda R6's and the SSR GT-3's shown earlier in this thread photoshopped by TXSTYLE. Can't beat the price of the R6's at $289 ea vs. the GT-3's at $549. Hopefully tirerack will offer both these wheels in a 9" or 9.5" width so a staggered set up can be used. Optimally I'd like to use 245/35-19's up front and 275/35's out back. Both these sizes come within a few 1/10"s of the overall diameter of the tires that are standard on the track model with 8" wheels in front and 8.5"s in back. Speedo reading won't be too far off, and hopefully the tire pressure monitoring system will still work.
I personally don't get excited about the 350Z's stock 17's or 18's except the 18" Rays...I could live with those. So, aftermarket is almost a must at this point and why not go with 19's. 19" wheel and tire packages will cost $2,500-$4,000, and the rear tires will only last 10K-15K miles, but your Z will handle better and look kick butt! You only live once so why not drop it an inch or so also! TXSTYLE said it well...hello Eibach...or Nismo.
I'd like to see the 19" Moda R6's, that TXSTYLE has on his GS 400, photoshopped onto the Z. Haven't done a lot of research, but looking at tirerack's selection of 19" wheels that fit the G35 (350Z fitments not yet shown), I like both the Moda R6's and the SSR GT-3's shown earlier in this thread photoshopped by TXSTYLE. Can't beat the price of the R6's at $289 ea vs. the GT-3's at $549. Hopefully tirerack will offer both these wheels in a 9" or 9.5" width so a staggered set up can be used. Optimally I'd like to use 245/35-19's up front and 275/35's out back. Both these sizes come within a few 1/10"s of the overall diameter of the tires that are standard on the track model with 8" wheels in front and 8.5"s in back. Speedo reading won't be too far off, and hopefully the tire pressure monitoring system will still work.
I personally don't get excited about the 350Z's stock 17's or 18's except the 18" Rays...I could live with those. So, aftermarket is almost a must at this point and why not go with 19's. 19" wheel and tire packages will cost $2,500-$4,000, and the rear tires will only last 10K-15K miles, but your Z will handle better and look kick butt! You only live once so why not drop it an inch or so also! TXSTYLE said it well...hello Eibach...or Nismo.
07-07-2002, 10:48 PM
#97
Banned
Thread Starter
iTrader: (1)
Join Date: May 2002
Location: The GYM!
Posts: 9,881
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by mfM3
I like this thread. Good to see TXSTYLE is a moderator. I remember reading he is lobbying JMANZ for a dedicacted wheel and tire section on this site. It would be great to have a few photoshop experts get interested in this topic. VQracer's link is very useful when plus sizing. www.miata.net/garage/tirecalc.html
I'd like to see the 19" Moda R6's, that TXSTYLE has on his GS 400, photoshopped onto the Z.
TXSTYLE said it well...hello Eibach...or Nismo.
I like this thread. Good to see TXSTYLE is a moderator. I remember reading he is lobbying JMANZ for a dedicacted wheel and tire section on this site. It would be great to have a few photoshop experts get interested in this topic. VQracer's link is very useful when plus sizing. www.miata.net/garage/tirecalc.html
I'd like to see the 19" Moda R6's, that TXSTYLE has on his GS 400, photoshopped onto the Z.
TXSTYLE said it well...hello Eibach...or Nismo.
And yes, I think they would look awesome on the Z as well even in Silver! I don't know the exact weight of the MODA's but, I remember pulling them out of the box before I shipped them out to be chromed and they were pretty damn light for a 19 inch wheel. So I definitely give my 'thumbs up' for a set of them on a Z no question. As far as the best place to purchase those MOMO's GlacierJ, let me also check on that. In the mean time here is a link I think you all will like. Incredible selection of rims! http://allstarwheels.com/mainframe.htm
07-07-2002, 11:12 PM
#99
Banned
Thread Starter
iTrader: (1)
Join Date: May 2002
Location: The GYM!
Posts: 9,881
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by GlacierJ
Thanks alot!!!
Thanks alot!!!
http://www.tires-n-parts.com/wheels/momo.html