315 25 20
#1
315 25 20
Is anyone running or tried to run 315 25 20 tires on the rear of their 350.
Rolling radius is perfect but would like to know about any clearance issues (12" wide rims 38mm offset)
thanks
Rolling radius is perfect but would like to know about any clearance issues (12" wide rims 38mm offset)
thanks
#3
What happened to the 18x10 wheels?
https://my350z.com/forum/wheels-and-...8x10-22-a.html
And the 20x10 wheels?
https://my350z.com/forum/wheels-and-...4-corners.html
https://my350z.com/forum/wheels-and-...8x10-22-a.html
And the 20x10 wheels?
https://my350z.com/forum/wheels-and-...4-corners.html
#4
What happened to the 18x10 wheels?
https://my350z.com/forum/wheels-and-...8x10-22-a.html
And the 20x10 wheels?
https://my350z.com/forum/wheels-and-...4-corners.html
https://my350z.com/forum/wheels-and-...8x10-22-a.html
And the 20x10 wheels?
https://my350z.com/forum/wheels-and-...4-corners.html
#5
I currently run 295/25/20's in the rear, I believe I could easily fit 315/25/20's on my 20x11's. I have iForged though, and they don't release their offsets so I can't help you out there. I've been able to roughly measure them out to be mid high 20's. My fenders are rolled, with stock body otherwise.
If you're using +38 offset on a 12" wide rim, I'd be more concerned about inner clearance.
If you're using +38 offset on a 12" wide rim, I'd be more concerned about inner clearance.
#6
Obviously I'm saying be more concerned with inner clearance, assuming with the Do Luck install you're cutting the fenders to properly install the widebody so it actually makes a difference.
#7
Just seeing if you are a baller or a faker. Baller status for you. Install 315 mm tires. Run some serious camber.
Thread
Thread Starter
Forum
Replies
Last Post
sentry65
Wheels & Tires
6
03-29-2005 09:34 AM