Varrstoen Wheels Thread
08-31-2011, 11:41 AM
#382
I personally have 19x9.5 and 19x10.5 +12 all around set up.
Wrapped in 245/275 35 profile tire.
Get the +12's hands down. You will not be disappointed.
At stock suspension, you might have been able to get away with +12's and not rolling fenders.
I rolled my fenders just to be safe because I had plans of dropping my Z.
I had a decent gap between fender and wheels.
But you're dropped a good ~1", I suggest you roll the fenders.
This is a reasonable set up and more ideal for you if you really wish to not roll the fenders.
However, you will not get the flush set up you are hoping for in the rears.
Why not roll the fenders?
Worried about ruining paint?
Take your time, do it SLOWLY.
Not a fan of 'pulling' fenders?
Fender won't pull unless you want it too.
You can roll the fender without pulling.
Wrapped in 245/275 35 profile tire.
Get the +12's hands down. You will not be disappointed.
At stock suspension, you might have been able to get away with +12's and not rolling fenders.
I rolled my fenders just to be safe because I had plans of dropping my Z.
I had a decent gap between fender and wheels.
But you're dropped a good ~1", I suggest you roll the fenders.
This is a reasonable set up and more ideal for you if you really wish to not roll the fenders.
However, you will not get the flush set up you are hoping for in the rears.
Why not roll the fenders?
Worried about ruining paint?
Take your time, do it SLOWLY.
Not a fan of 'pulling' fenders?
Fender won't pull unless you want it too.
You can roll the fender without pulling.
08-31-2011, 12:31 PM
#384
Registered User
iTrader: (1)
Join Date: May 2008
Location: Sacramento, CA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Thanks a lot for the advice. I really want to go +12. Only reason I WOULDN'T is because me trying to roll my fenders would result in disaster and the only shop that's even heard of "rolling fenders" around my area is CIN which charges $60 a fender. Also, from what I understand, +12 would not need a pull, just a roll, correct? Thanks!
08-31-2011, 12:42 PM
#385
Thanks a lot for the advice. I really want to go +12. Only reason I WOULDN'T is because me trying to roll my fenders would result in disaster and the only shop that's even heard of "rolling fenders" around my area is CIN which charges $60 a fender. Also, from what I understand, +12 would not need a pull, just a roll, correct? Thanks!
08-31-2011, 04:27 PM
#389
Thanks a lot for the advice. I really want to go +12. Only reason I WOULDN'T is because me trying to roll my fenders would result in disaster and the only shop that's even heard of "rolling fenders" around my area is CIN which charges $60 a fender. Also, from what I understand, +12 would not need a pull, just a roll, correct? Thanks!
09-06-2011, 08:04 PM
#392
New Member
iTrader: (1)
Join Date: Sep 2011
Location: Texas
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Going to get the ES 2.2.2 in Matte Black for my Lemans Sunset Z. Pics soon to follow. Just picked up my Z 2 weeks ago.
Last edited by driftshot; 09-08-2011 at 07:15 PM.
09-09-2011, 12:08 PM
#394
Registered User
Join Date: Jan 2010
Location: los angeles
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
lol
09-09-2011, 04:55 PM
#395
Registered User
09-15-2011, 12:05 AM
#398
Registered User
Hello, I've been following my350z for a long time, but never took time to post soemthing till now 
here's my Z with varrstoens:
19" 9.5 et22 with 245/35 R19
19" 10,5 et12 with 275/35 R19
here's my Z with varrstoens:
19" 9.5 et22 with 245/35 R19
19" 10,5 et12 with 275/35 R19