Varrstoen Wheels Thread
03-26-2012, 01:22 PM
#841
Registered User
iTrader: (1)
Join Date: Oct 2011
Location: San Carlos, CA
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
I would hold that order and look at what ur ordering really quick because 18x9.5 +22 in the rear is not going to look that great. you would want some more poke so i would do 18x10.5 +22 in the rear and run 275/40/18 in the rear and have the 18x9.5 +22 up front with a 245/40/18 or 255/40/18. like for example im running 18x9.5 +12 front and 18x10.5 +0 in the rear with 225/40/18 front and 245/40/18 rear and it is very flush.
03-26-2012, 05:47 PM
#842
I would hold that order and look at what ur ordering really quick because 18x9.5 +22 in the rear is not going to look that great. you would want some more poke so i would do 18x10.5 +22 in the rear and run 275/40/18 in the rear and have the 18x9.5 +22 up front with a 245/40/18 or 255/40/18. like for example im running 18x9.5 +12 front and 18x10.5 +0 in the rear with 225/40/18 front and 245/40/18 rear and it is very flush.
03-29-2012, 09:39 AM
#845
Registered User
Join Date: Mar 2011
Location: MA
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
I would look at the +12/+15 offset. I have posted a pic below in this thread of what this set up will look like.
)
04-02-2012, 10:20 AM
#848
Registered User
iTrader: (1)
Join Date: May 2011
Location: East Brunswick, New Jersey
Posts: 784
Likes: 0
Received 2 Likes
on
2 Posts
For those of you who went with matte black, what wheel cleaner do you guys use?
The one I bought leaves streaks behind, even after it's dry.
The one I bought leaves streaks behind, even after it's dry.
Last edited by NJVinny350z; 04-02-2012 at 10:22 AM.
04-02-2012, 11:17 AM
#849
Registered User
Join Date: Jan 2012
Location: rocklin, ca
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Gunmetal or black varrstoens
I picked up a set of 19 varrstoen 2.2.2s a couple moths ago, long storey short the guy had rattle canned them white (they look terrible) so its time for paint
What would look better on my ppw 06 z
Gunmetal or black ( flat semi or high gloss)
Your opinions are appreciated
What would look better on my ppw 06 z
Gunmetal or black ( flat semi or high gloss)
Your opinions are appreciated
04-02-2012, 03:31 PM
#852
Registered User
iTrader: (34)
Join Date: Jul 2006
Location: Fayetteville, NC but from 757
Posts: 5,800
Likes: 0
Received 0 Likes
on
0 Posts
Luckily, you "practiced" on a cheap set of rims, now buy the TE's and start over! Seriously, rims are probably done! What rim cleaner did you use?
04-04-2012, 08:46 AM
#855
Polished or Hyper Black?
04-05-2012, 10:51 PM
#858
Registered User
Join Date: Oct 2011
Location: norcal
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
specs?
I`m on +12`s and gonna lower it and everything in about a week when i get them in, Probably going to get a very small spacer since i`ll be doing a roll and pull
I`m on +12`s and gonna lower it and everything in about a week when i get them in, Probably going to get a very small spacer since i`ll be doing a roll and pull
04-05-2012, 10:53 PM
#859
Registered User
iTrader: (1)
Join Date: May 2011
Location: East Brunswick, New Jersey
Posts: 784
Likes: 0
Received 2 Likes
on
2 Posts
19x9.5+12, 19x10.5+12
Front: 235/35/19
Rear: 255/35/19
Lowered on BC Coilovers with a fender roll running -1.5 rear camber with SPC rear camber arms.
Front: 235/35/19
Rear: 255/35/19
Lowered on BC Coilovers with a fender roll running -1.5 rear camber with SPC rear camber arms.
Last edited by NJVinny350z; 04-05-2012 at 10:55 PM.