gixxer1000

iTrader: (1)

Hey guys I just installed a new set of 20" axis penta on my 2005 350z.. The rims arrived mounted and balanced. We installed them and now I get a vibration at speed between 50-80mph And I get a pull to the right now?? The car is not lowered and the stock 17 never had a vibration issue or anything ?? When you put 20s on the 350z do you have get everything adjusted after .. Keep In touch

KornerCarver

iTrader: (2)

It sounds like your new wheels and tires may not be correctly balanced. I would take it to a shop and have the balance checked. You should not need to adjust anything when going to 20" wheels.

kham25

iTrader: (3)

Perhaps a balance issues or maybe you bent a wheel already!! Ive bent new 19 inch wheels in a matter off days driving here in the city. I went through your senerio before..

gixxer1000

iTrader: (1)

Yea that's what I was thinking.. I don't think they are bent lol .. Do you think I should get my aliment checked?

kham25

iTrader: (3)

Alignment dont cause vibration from what i know.. Rebalance both front wheels and go from there.. If that checks out then check tires.. Ive recieved Out OF Round tires from tirerack once and vibrated like a ****.. Let me tell you man having aftermarket rims can give you a focking headache

cheshirecat79

iTrader: (9)

Hubcentric rings. Do those wheels require them? Did you install them if so?

gixxer1000

iTrader: (1)

Thanks ... You think I sould only rebalance the front? What about an aliment for the pulling to the right?

gixxer1000

iTrader: (1)

Yes they have the hub rings in.

DavesZ#3

iTrader: (26)

That would be my first guess - a lot of aftermarket wheels require them because of generic sizing.

Pulling to the right - could be alignment, you should be getting that checked annualy anyway. If aligned, a defective tire could cause "radial pull".

Waiz

iTrader: (57)

In for fotos

gixxer1000

iTrader: (1)

Will do..

ReelBigAndy

iTrader: (2)

Couldn't hurt to check the tire pressure, that could account for the pulling

Waiz

iTrader: (57)

Pressure check is a good suggestion, I have a feeling it's balancing and alignment related.

Take it to a reputable shop and get an inspection.

350z_Boi

iTrader: (1)

It's either your tires or check your lug nuts. It might be loose..

gixxer1000

iTrader: (1)

Hey guys I took the wheels yesterday to discount trie and the figured out the issue with my penta.. The rebalanced then and re installed the right front. So I get the car back after it was do and I noticed the damage my front rim!! Guess they rushed one of the lug nuts And damaged the nut hole around it. They offered to either get me a new rim or have some rim place repaint the damage?? I do know what to do ? I was so pissed not even 20 miles ..

davidv

iTrader: (2)

These are 20-inch wheels? Surprised that Discount Tire would even touch them.

terrasmak

iTrader: (8)

Thats why i always tell them "NO AIR TOOLS" and i also have aluminum lugs. Tire monkeys running loose with air impacts are not good for aftermarket wheels.

tylerxfire

iTrader: (15)

me no what tell u

davidv

iTrader: (2)

Photos?

gixxer1000

iTrader: (1)

I tried to take a pick yesterday but it was to dark. Should I try to get a new rim? Or let the rim place paint it? Or just leave it ?