Want a more aggressive wheel setup (recommendations please)
#21
Sorry to bud in on your thread but I had a question guys. I have Axxis wheels also but mine are 19x8.5 front and 19x9.5 in the back, I currently have 235 35 on the front and I will be getting some new tires in the rear but wanted some meaty tires in the back. Can I put 285/30 or should I stay 275/35 ???
Same here.
Last edited by terrasmak; 01-18-2011 at 06:13 PM.
#23
225/35 + 15 mm spacer front & 245/35 20mm spacer rear would be fine. doesn't look like your low enough to worry about pulling fenders & making huge camber changes. the smaller tires would compensate for clearance. i don't think you will have a major rubbing issue. probably about the same due to spacers. big bumps or sharp turns....
#24
marques1:
i thought you stated that you dont want to change tire sizes anytime soon...
and alot of the advice given will cause you to have the Stretch and poke look (fyi, not bashing it, i like it, but to each his own)..... do you want that type of look????
you have to ask yourself that first... bc personally if i was going to get new tires, i would reccomend what i have, 255/30/20 F and 305/25/20 R ..... or you can also go with 245/30 in the front to have smaller diameter....
UP to you bro, but by any chance DO YOU KNOW WHAT CAMBER YOUR @ NOW??????
you should try and go measure how much you want to go out with a ruler, if you dont want to get new tires.... i think you should just measure it and later if you want diff. spacers then just sell the ones you have and go bigger, or sell the front spacers and put the rear spacers on the front ...
sorry for the rant, but What look do YOU want?
i thought you stated that you dont want to change tire sizes anytime soon...
and alot of the advice given will cause you to have the Stretch and poke look (fyi, not bashing it, i like it, but to each his own)..... do you want that type of look????
you have to ask yourself that first... bc personally if i was going to get new tires, i would reccomend what i have, 255/30/20 F and 305/25/20 R ..... or you can also go with 245/30 in the front to have smaller diameter....
UP to you bro, but by any chance DO YOU KNOW WHAT CAMBER YOUR @ NOW??????
you should try and go measure how much you want to go out with a ruler, if you dont want to get new tires.... i think you should just measure it and later if you want diff. spacers then just sell the ones you have and go bigger, or sell the front spacers and put the rear spacers on the front ...
sorry for the rant, but What look do YOU want?
#25
what about spacers??? what can i do regarding that. I used to have 245 in the front but i like the 235 better for some reason. So, i will get 275/35 in the rear and i also wanted to add the spacers what to recommend?
Last edited by fabre80; 01-19-2011 at 05:32 PM.
#26
Couldn' tell you, don't know the offsets of the wheels you own. If they are some crappy ADR's or other junk, they probably have the universal offset of +35. Then you just do a 20 or 25mm spacer front and rear.