19x12 with a 3.5 inch lip
#1
Registered User
Thread Starter
Join Date: Feb 2009
Location: San Jose
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
19x12 with a 3.5 inch lip
has anyone tried to fit a 19x12 with a 3.5inch lip on their Z? and I dont have a wide body kit on my car. Sorry not sure what the offset is as of right now. thank for the help.
So i was told this needs more info (sorry i made assumption) true coil over (stance) adjustable camber kit,& adjustable toe kit, and fenders are rolled. Car has been dropped about 2inch as right now, but i dont mind raising it if i can fit 19x12. I dont care what tire size i have to run and i will try to get the offset of the rims soon. Just wanted to know if any one has been able to fit 19x12 on the rear so i can start looking more into this. thank you
So i was told this needs more info (sorry i made assumption) true coil over (stance) adjustable camber kit,& adjustable toe kit, and fenders are rolled. Car has been dropped about 2inch as right now, but i dont mind raising it if i can fit 19x12. I dont care what tire size i have to run and i will try to get the offset of the rims soon. Just wanted to know if any one has been able to fit 19x12 on the rear so i can start looking more into this. thank you
Last edited by gzelda; 08-03-2011 at 12:08 PM.
#2
Registered User
iTrader: (2)
Join Date: Oct 2010
Location: Philadelphia
Posts: 591
Likes: 0
Received 0 Likes
on
0 Posts
Your question needs more info. Definitely need to know offset of the wheels. Are you lowered? How low? Do you have adjustable camber arms? What size tires? Are your fenders rolled/pulled? Probably missing stuff too. I'm no expert.
#3
Sponsor
Vivid Racing
Vivid Racing
iTrader: (67)
Join Date: Dec 2002
Location: Gilbert,AZ
Posts: 4,078
Likes: 0
Received 0 Likes
on
0 Posts
Without knowing the offset it's impossible to tell. I'm making a guess here, but I'd say yes they'll fit but you'll need some fender mods.
Here's a Z with really aggressive fitment:
20x9.5 -5mm and 20x11 -5mm
Here's a Z with really aggressive fitment:
20x9.5 -5mm and 20x11 -5mm
Trending Topics
#15
Registered User
iTrader: (6)
Join Date: Apr 2009
Location: New OrleanZ/Greer, SC
Posts: 1,050
Received 0 Likes
on
0 Posts
19x12 has been done as stated above, be prepared for mega fender pull and max camber.
I ran 19x11-17 on my last setup. Its sexy but not worth the trouble. Just a FYI 3.5" lip is weak on a 12 width, my 11 in these pics have 6" lips.
I ran 19x11-17 on my last setup. Its sexy but not worth the trouble. Just a FYI 3.5" lip is weak on a 12 width, my 11 in these pics have 6" lips.
Last edited by Jacob350z; 08-03-2011 at 10:49 PM.