Need help plz 350z gear grinds
#1
Registered User
Thread Starter
Need help plz 350z gear grinds
Hey guys just looking for a little input. I have a 2006 350z 6 speed. Was driving it absolutely fine no issue.. All of a sudden every gear was grinding as if the clutch was not working (the clutch was not old and still grabbed hard). As i would shift gears, each would grind unless I waited for the RPM's to fall and then it would shift into gear without a grind. I brought it to the mechanic and he said the clutch was completely gone and i also needed a new fly wheel? How could the clutch randomly be destroyed from normal driving? Could this be the master clutch cylinder and they are trying to scam me? Anyone? Thanks
Last edited by jraf23; 12-21-2015 at 08:46 PM.
#3
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
I would start with bleeding the clutch
#4
Senior Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (13)
How many miles on the car?
The following users liked this post:
PerfZ (12-23-2015)
#7
General & DIY Moderator
MY350Z.COM
MY350Z.COM
iTrader: (64)
Have you checked the fluid level of your clutch master? When was the last time you changed it?
BTW- if the clutch was "completely gone", you would feel quite a bit of slippage once in gear and accelerating. Going uphill or at WOT, you'll notice this slippage with a worn out clutch. Did any of these symptoms occur?
BTW- if the clutch was "completely gone", you would feel quite a bit of slippage once in gear and accelerating. Going uphill or at WOT, you'll notice this slippage with a worn out clutch. Did any of these symptoms occur?
The following users liked this post:
jraf23 (12-22-2015)
Trending Topics
#8
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
#9
Registered User
Thread Starter
Thanks for the replies, the fluid level is fine but I have never changed it. I never experienced any slipping of this clutch, it grabbed low and never slipped. That is why i was a little dumbfounded when they told me that the clutch and possibly fly wheel was toast. Could this be a simple fix or adjustment?
#11
Registered User
Thread Starter
Yes, the clutch will engage without issue as long as the RPMs are low and not being revved without stalling. When driving i shift to neutral, wait for the RPM's to fall and then shift into gear without a problem.
The following users liked this post:
terrasmak (12-23-2015)
Thread
Thread Starter
Forum
Replies
Last Post