I tool all morning long to install this, four hours. I have the VQ35HR and found a hole for the feed line to mount, but the cooler was too big horizontally to fit. I had to rig it to mount on the Mishimoto Oil cooler with 4 Nylon radiator bolts. I merely tapped the return line and checked Matic "S" fluid and only added about a pint. Drilling was necessary for the return line. Maybe Stillen would have been my better choice. This was best bang for eighty-three bucks, universal.

Good luck on finding pic by pic write up DIY in this or wikipedia.

I even used a 1/4 fuel line male to male coupler because I felt the mishimoto drain **** was useless.

 

Picked up a new heart for my girl.



Removing the twins.(What a pain in the ***).
Before

After

 

Good Stuff, Chris!
LOVE your car sir. Super-clean car, and nice pics!

 

Lol true, thank you. Had spacers, they were ruined in a recent car crash. Got another set of spacer but found it as a hassle to keep taking them on and off to get sized for wheels. I have already been sized for Casa Viaggio Wheels AV02s and are in route approximately 2 weeks.

 

Thanks J. @mic your correct. I had the tomei and added Art pipes and it was too much for me. Sold the tomei and was browsing craigslist waiting for an S tune when i came across the fujitsubo rep. 3 inch single to dual. Tips were small on the Niz so i added some 4.5 inchers to finish it while i wait for an s tune to come up

 

So.
What's next, Amigo?
Inquiring minds...

I thinking tall FD gears, rather than FI
You?

 

Agreed! Gears all the way.

 

I didn't do it intentionally, but an act of God did something for my Z. Ran over something driving home through a bad storm. Heard a sound somewhat like my car being assraped by the Devil. Pulled over and thought I might have sucked in water or something worse. Eventually found the issue when I looked underneath the car. Thank God for Z1 because a new shroud came like two days later.

 

Took her to road America all weekend for the pirelli world challenge gt races. Will post up some more pics later of both the gtrs and the altima that were there. All 3 cars had first place finishes for the weekend.

 

gave her a bath, and yes its a Z......Z06

 

travis

 

repaired annoying heat shield rattle =D

 

I will give you a pass, T-Rav.
Your Z looks pretty dam good. Don't
Dugan it, br0.

 

Jh you gotta learn to quote minus all pics br3h.

 

 

In the last month...

Put some new wheels and tires on and put my mudflaps back on:


Had my mechanic install kinetix rear camber arms, lockout washers, and toe bolts:


Installed a home depot oil catch can:


And got an alignment! She's running better than ever!!

 

Can I get a write up on that home depot catch can, I'd like to get one.

 

https://my350z.com/forum/engine-driv...catch-can.html

Boom! There you go. It's a easy and fun mod to do for your Z. After 3 days of driving I found about 1 teaspoon of oil in the catch can. Great mod imho.

 

No
ted ; )

 

Piddly ch1t, but I got my clear markers in.
Daytime white LEDs in back for daytime running, amber LEDs in lateral facing park tied into turn signals.

Might make me look a lil newer haha.