For the mods: MOD's this is just a suggestion forum not a for sale one

Well I finally have to put my project z to the side if not sell it, I have been Mobilized with little notice and need to make some room in the garage, so I am see what i might get for my second Z with no motor. I appreciate your thoughts on what it will be worth. I know I would get more to part it out, but time is a constraint, so its all or nothing at this point as it will be a family member dealing with it if someone wanted to buy it. Heres a list of whats in it.

Shell is an 03 350z MT touring super black Clean title w/ 60k mileage
Forced Induction
-Greddy TT with intercooler with larger wheels on turbos equivlant to a 20g with spool up of a 18g, welded on turbo out piping, Ceramic coated manifolds
-Cooling mist FMGS water/alcohol injection
-tial bov
Engine components
-2 Bare short blocks with cranks
-1 set of heads with bc stg 3 cams, over size valves, ferrera springs and retainers and one hell of a port job (Injected's $5k ones)
-1 set of heads with JWT stg 2 cams, stock valves (two are bent), JWT HD springs, mild port job
-1 Set stock rev up heads
-Pathfinder coolant kit
-both revup and non rev up timing covers
-Ported runners
-LW Pulleys
-Injected Performance solid Motor Mounts
-L19 studs heads
Fuel
-ID 1000cc injectors
-walbro 255
-AAM stage 1 Return
-1 Extra set of fuel rails
-Aeromotive Inline 340lph*new*
Intake
- Polished Plenum
- Powerlab spacer
Engine Management
- Haltech
-Uprev
-Race Logic Traction Control *new*
-Velocity tunning with External AIT sensor
Cooling
-pathfinder mod *new*
-Koyo Raditor
-Z1 Red silicone hoses
-Oil cooler
Gauges
-Defi boost/egt
-Innovate lc1
-Blue leds on all gauges stock and aftermarket
Exhaust
-AAM 3inch Down pipes *new*
-AAM 3inch true dual *new*
Drive train
-2 x cd0009 trannies, 1 new with 5k and other with 30k (for parts )
-1 stock 03 tranny gear grind
-OS Giken LSD with base axels
-Z1 70A trans mount
-18x9/18x10 tsw time attacks with nitto invos brand new on them
-Stock rims
-Nismo Short Shifter
Suspension
- Stance gr+ coilovers
-Full adjustable arms front and rear
-Akebono BBK F/R
-Hotchkis Swaybars
-Power grid End links
-Cusco Strut Bar powdercoated red
Interior
-Sparco Harness Bar *new*
-All blue guages including Nav
-JVC Double Din Head Unit
-Race Logic traction control, digital
-Z1 HD Hatch Springs
Exterior
-Seibon GT Hood with sparco hood pins
-stock hood/ bumper
-Carbonfiber Nismo V2 spoiler
-paint is 7.5/10
Misc
-Hella supertones
-Demon eye headlights with black housing 03's



There is probaly more, but I am reciting from memory. All this car needs to be running is a clutch/flywheel, piston/rods, bearings to go with. I was so close yet so far....I AM NOT PARTING OUT, i want to know what i should expect as a single unit I know I can make more parting out, but I dont have a way of doing so.

 

Nobody will buy a heavily modded car. If you do find somebody willing to buy, it could take you a year or more for that to happen.

As it has been said a thousand times before, sell the mods and return the car to stock. Otherwise, you might as well sell it for the price of a stock car as that will be the only way you can find a buyer.

BTW - title fixed to match your post contents

 

No one will buy all of that once. Different people have different needs, different goals, and most already have cars they want to mod. I'd say $15k maybe if the car isn't running.

People are trying to sell fully completed Z's with over $30k invested for low $20's.

I'll buy some of that stuff though. Like the new AAM downpipes.

 

What do you want for it?

 

Only problem with being a regular contributor is that members know the history of the car. Hope the sale works out better than this thread: https://my350z.com/forum/forced-indu...e-2-motor.html

 

Ouch. Maybe $15k tops.

You need to part. Get over it.

 

Haha I forgot about that!

 

just keep it unless you're absolutely in need of cash. It's true, you won't get anything near what you think you should get.