What do you do with this coolant pipe?
#1
New Member
Thread Starter
What do you do with this coolant pipe?
So this steel pipe rides on the passenger side and I am sure that on some cars this thing rusts so badly that it either springs a leak or crushes when working on it.
What do you do then ?
How do you replace it?
Is it permanently connected to the aluminum part at the factory and a new one bolts from the back of the heads?
Just curious
What do you do then ?
How do you replace it?
Is it permanently connected to the aluminum part at the factory and a new one bolts from the back of the heads?
Just curious
#2
New Member
iTrader: (6)
Steel part pulls out of the aluminum part. There's an o-ring seal. You gotta wiggle it and pull fairly hard. Replace the o-ring and use a little silicone grease when you replace it.
The following 2 users liked this post by i8acobra:
CFAUVEL (11-14-2019),
rustyschopshop (11-14-2019)
The following users liked this post:
CFAUVEL (11-15-2019)
#4
New Member
Thread Starter
Cool ....where is that bolt?
I actually DON'T have a problem with that pipe , currently....but could see how there COULD be a problem. Was just curious.
Worked on my wife's G35 a few weeks ago....had to cut the heater hose off at the firewall and at this pipe (after getting the clamps off) The bleed valve disintegrated...
Thread
Thread Starter
Forum
Replies
Last Post