P1078 code- remains after replacing the sensor
#1
New Member
Thread Starter
Join Date: Feb 2021
Location: Chattanooga
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
P1078 code- remains after replacing the sensor
2006 Touring 6speed with 115k miles…just had the clutch and flywheel replaced and now am throwing the 1078 code(Exhaust Valve Timing Control Position Sensor Bank 1 Circuit.)
car seems to be running fine with no other lights - YouTube suggests hard to start/ bad idle and possible stalling….. but I am not experiencing any of that.
maybe someone bumped or loosened/unplugged it- but if so wouldn’t I be experiencing all the ugly stuff besides the SEL ?
so……update….
Replaced the sensor hoping for a quick and easy fix- still getting the same SEL and code🤯
not sure where to go from here?
car seems to be running fine with no other lights - YouTube suggests hard to start/ bad idle and possible stalling….. but I am not experiencing any of that.
maybe someone bumped or loosened/unplugged it- but if so wouldn’t I be experiencing all the ugly stuff besides the SEL ?
so……update….
Replaced the sensor hoping for a quick and easy fix- still getting the same SEL and code🤯
not sure where to go from here?
Last edited by 139driver; 07-02-2021 at 01:15 PM. Reason: Same issue after replacing the sensor
Thread
Thread Starter
Forum
Replies
Last Post
3_FILTHY_Z
Maintenance & Repair
12
05-27-2009 08:46 PM