For those with power seats
#1
Registered User
Thread Starter
![Default](https://my350z.com/forum/images/icons/icon1.gif)
The plastic assembly on the outside of the drivers seat was separating at the seam. I take it the dealer and he orders a new one. A month later it finally arrives and get installed. The seam is still loose.
I talk to the tech who did the job and he says that he's done a lot of these at this point and all we can hope for is that the next one will fit better. Obviously Nissan has a problem with the assembly. The tech suggested that I contact Nissan and naturally, I'll do that.
If you have power seats, check to see if you're getting separation. If you are, contact Nissan USA. This is obviously a design flaw, but Nissan won't do anything about it until we make enough noise.
Oh and for those trolls out there who worry about the problems they read about, this is minor. It has in no way ruined my experience.
I talk to the tech who did the job and he says that he's done a lot of these at this point and all we can hope for is that the next one will fit better. Obviously Nissan has a problem with the assembly. The tech suggested that I contact Nissan and naturally, I'll do that.
If you have power seats, check to see if you're getting separation. If you are, contact Nissan USA. This is obviously a design flaw, but Nissan won't do anything about it until we make enough noise.
Oh and for those trolls out there who worry about the problems they read about, this is minor. It has in no way ruined my experience.
Thread
Thread Starter
Forum
Replies
Last Post
MAsSIVrOOM
Engine & Drivetrain
2
10-20-2023 10:50 AM