Notices
350Z Roadster General discussion for the 350Z Roadster

Convertible Top Rod Bent Help!!!!!!!!

Old Jul 6, 2015 | 04:28 PM
  #1  
rlawndus93's Avatar
rlawndus93
Thread Starter
Registered User
 
Joined: Sep 2014
Posts: 3
Likes: 0
From: columbus
Default Convertible Top Rod Bent Help!!!!!!!!

So in the begnning there was a problem with the hatch of the Right part of the hook. The middle part and left part was able to lock completely but the right side would leave a space. This happen because I used force to lock the hood when it wasnt completely closed. But with the right side leaving a space I was dumb enough to drive 100mph in a highway and pumped up the hood itself. The picture shows one part of the rod is bent. I even went to the dealers and they told me I need to change the whole hood including the motors even though the diagnostic test result showed that only rod has been bent. They charged me 10500 for it.
I was wondering does anyone had a same problem and knows how to fix it???? Please help me..
I live in Columbus Ohio and anyone would like to help me I would be please for your contact.




the middle part is bent


Attached Thumbnails Convertible Top Rod Bent Help!!!!!!!!-img_0580.jpg   Convertible Top Rod Bent Help!!!!!!!!-img_0582.jpg   Convertible Top Rod Bent Help!!!!!!!!-img_0583.jpg   Convertible Top Rod Bent Help!!!!!!!!-img_0584.jpg  

Last edited by rlawndus93; Jul 6, 2015 at 04:30 PM.
Reply
Old Jul 6, 2015 | 04:48 PM
  #2  
KornerCarver's Avatar
KornerCarver
New Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Jun 2003
Posts: 3,387
Likes: 171
From: Republic, MO
Default

I suspect the dealer is right and you are going to have to replace the entire framework and possibly the top as well. You might try check for a top in a junk yard.
Reply
Old Jul 6, 2015 | 04:50 PM
  #3  
rlawndus93's Avatar
rlawndus93
Thread Starter
Registered User
 
Joined: Sep 2014
Posts: 3
Likes: 0
From: columbus
Default

But it is just the middle part that is bent. Cant I just buy the rod and switch it??
Reply
Old Jul 6, 2015 | 04:58 PM
  #4  
travlee's Avatar
travlee
Master
Premier Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (8)
 
Joined: Jul 2011
Posts: 49,725
Likes: 9,296
From: Texas
Default

prob not
Reply
Old Jul 6, 2015 | 05:02 PM
  #5  
travlee's Avatar
travlee
Master
Premier Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (8)
 
Joined: Jul 2011
Posts: 49,725
Likes: 9,296
From: Texas
Default

you can get the metal part of it for $3200 or the whole thing for $4200 from courtesy

whole thing

http://www.courtesyparts.com/97003m-...4_715_824_838&

parts

http://www.courtesyparts.com/kb_sear....php?keywords=[97004]+\(z33&cPath=714_715_824_838
http://www.courtesyparts.com/97150-c...4_715_824_838&

Last edited by travlee; Jul 6, 2015 at 05:03 PM.
Reply
Old Jul 6, 2015 | 05:02 PM
  #6  
dkmura's Avatar
dkmura
General & DIY Moderator
MY350Z.COM
Premier Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (64)
 
Joined: May 2002
Posts: 8,624
Likes: 1,393
From: Aurora, Colorado
Default

First, you need to change your wording of "hood" to describe your problem. A hood covers the VQ engine up front, your problem has to do with the 'vert top. As for your top, bending one part as badly as you did driving 100 mph bent one part and damaged several others. That 'vert top is a fragile part.

Too bad you don't live closer to Colorado- I'd sell you the complete top with motors for a fraction of what the dealer is asking...
Reply
Old Jul 6, 2015 | 05:22 PM
  #7  
Cux350z's Avatar
Cux350z
hatersgonnahate
Premier Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (162)
 
Joined: Apr 2005
Posts: 15,390
Likes: 1,085
From: Greenville, SC
Default

for 10,500 I would do the following:

1. Laugh in the service advisers face...hard
2. Tell him to GFY
3. Laugh more and flip the bird on the way out
4. Buy used z vert. (can be had for under 10,500)
5. Swap tops
6. Sell used Z to carmax (you will lose a couple thousand on this but not 10.5k)
7. Go back to nissan dealership and laugh in that fools face
Reply
Old Aug 30, 2021 | 11:43 AM
  #8  
Faiznoorani's Avatar
Faiznoorani
New Member
 
Joined: Feb 2021
Posts: 5
Likes: 0
From: Irvine
Default Same issue

Do you still have this convertible top that I can buy? I'm in CA but I'll pay for shipping if it's an issue.


Originally Posted by dkmura
First, you need to change your wording of "hood" to describe your problem. A hood covers the VQ engine up front, your problem has to do with the 'vert top. As for your top, bending one part as badly as you did driving 100 mph bent one part and damaged several others. That 'vert top is a fragile part.

Too bad you don't live closer to Colorado- I'd sell you the complete top with motors for a fraction of what the dealer is asking...
Reply
Old Aug 31, 2021 | 07:49 AM
  #9  
iideadeyeii's Avatar
iideadeyeii
New Member
10 Year Member
Community Favorite
iTrader: (6)
 
Joined: Nov 2011
Posts: 4,025
Likes: 477
From: Lawtown
Default

2015 nvm
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mrfobbyaccent
Maintenance & Repair
1
Nov 17, 2014 07:42 PM
Horms10
Exterior & Interior
5
Apr 2, 2008 08:03 PM
nothix
Exterior & Interior
4
Mar 24, 2007 08:09 PM
original786
Exterior & Interior
4
Mar 4, 2007 12:26 PM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 02:22 AM.