Hey guys im installing my Pioneer D3 tomoarrow i had installed this in my last car and find it to be a easy install, but were im having a problem right now is i cant find were the 08 350z Speed wires are located so i can tap into one of them for the gps and performance part of the d3. i have used the search button on this forums but im not finding anything.

thanks for any help!

 

try www.avic411.com . when i installed my avic-n1 into my z, from what i remember, its the white wire on the white ac control box behind the shifter panel thingy. Im not 100% sure on this but if someone can confirm it, thatd be great.

 

 

yeah its the white one on the ac control.. put it in you need it if you dont ur avic will be screwy

 

Thanks Guys That is alot of help and sounds easy enofe, and that image is great as well! Im starting the install right now!

 

So Im done and ill post some pics later, The install was not that bad but man with all the wires the D3 has it got croweded back there almost did not want to lay in right. i also had to redrill some custom holes in the brackets for the beveling kit to sit flush, but all in all looks great now! and i like it!

BUT MY BIG questions is after having my battary off all day then putting it back on i noticed my SERIVCE ENGINE SOON lights has came on and well i never known a car to pop that light when unhooking a battary. do i need to reset it im only at 500 miles on car! help! thanks.

 

There are 2 grey connectors that plugs behind the A/C controls. I see only 1 white wire on those connectors. Is this the speed sensor?

 

would this be the same wire that would be used with Tanabe's TEAS to detect the speed of the vehicle???

 

In following the thread, I see two answers.

1. Is it the white wire in the white connector

2. The white wire on the middle gray connector with silver markings on the wire.

Note: there are actually three white wires on the middle gray connector, one has gray marks, one has a black line and one has a green line.

This is for the 2005 350Z.

Thanks