Notices
Audio & Video 350Z Mobile entertainment and other electronics

My Full custom system, fiberglass mold an more

Thread Tools
 
Search this Thread
 
Old Aug 22, 2003 | 03:21 PM
  #1  
ZackT's Avatar
ZackT
Thread Starter
Registered User
 
Joined: Aug 2003
Posts: 34
Likes: 0
From: st pete florida
Default My Full custom system, fiberglass mold an more

This is my custom system,
sorry for the poor quality pics

This is what I had done to my Daytona blue Z. Ill start with the box. It is a custom fiberglass molded box under the rear strut, painted to match my car(daytona blue), with two 10 inch kicker solo baric subs. on the other side of the strut the mold angles down toward the front with a digital kicker low amp(painted to match also), beyond this box which u cant see is a hidden kicker high amp, for the kicker tweeters i had installed in the doors(which you cant see either because they are behind the stock door panels) Behind my drivers seat there is another custom fiber glass mold (painted to match) in this mold there is a gamecube, The game cube is played on the new flip out touch screen head unit, which also has satilite radio and tv. this head unit rest in my customized center consol. which was sanded down and painted like the rest. my shift **** is momo with the stock boot dyed blue. i also have custom blue and black floor matts that say fairlady z on it. in the gauges on the center consol holds the 2 lights for my fully loaded K-40 radar with diffuser that was installed. going back to the trunk i had them put leather down with the z etched out with the 3 dot trade mark on each side. the etched part is in aluminum. I also have giovanna racing kobe style rims on the car, 19s in the back 18s in the front.


next week my veilside version 3 kit goes on with lambo doors

tell me wat u think.
Attached Thumbnails My Full custom system, fiberglass mold an more-my-z-s-system-rear-angle.jpg  

Last edited by ZackT; Aug 22, 2003 at 07:04 PM.
Reply
Old Aug 22, 2003 | 03:23 PM
  #2  
G}{H's Avatar
G}{H
Registered User
 
Joined: Jul 2003
Posts: 75
Likes: 0
From: NJ
Default

MORE JPEGs please

Nice job so far dude.
Reply
Old Aug 22, 2003 | 03:24 PM
  #3  
ZackT's Avatar
ZackT
Thread Starter
Registered User
 
Joined: Aug 2003
Posts: 34
Likes: 0
From: st pete florida
Default my amp set up

my amp set up
Attached Thumbnails My Full custom system, fiberglass mold an more-my-amp.jpg  
Reply
Old Aug 22, 2003 | 03:29 PM
  #4  
ZackT's Avatar
ZackT
Thread Starter
Registered User
 
Joined: Aug 2003
Posts: 34
Likes: 0
From: st pete florida
Default custom center consol view

my custom consol
Attached Thumbnails My Full custom system, fiberglass mold an more-my-center-consol.jpg  
Reply
Old Aug 22, 2003 | 03:32 PM
  #5  
ZackT's Avatar
ZackT
Thread Starter
Registered User
 
Joined: Aug 2003
Posts: 34
Likes: 0
From: st pete florida
Default gamecube view

gamecube view
Attached Thumbnails My Full custom system, fiberglass mold an more-gamcube.jpg  
Reply
Old Aug 22, 2003 | 03:34 PM
  #6  
ZackT's Avatar
ZackT
Thread Starter
Registered User
 
Joined: Aug 2003
Posts: 34
Likes: 0
From: st pete florida
Default floor matts

floormatts
Attached Thumbnails My Full custom system, fiberglass mold an more-my-z-s-floormatts.jpg  
Reply
Old Aug 22, 2003 | 03:52 PM
  #7  
wren57's Avatar
wren57
Banned
iTrader: (34)
 
Joined: Apr 2003
Posts: 8,663
Likes: 0
From: I'm A Gypsy
Default

I think it looks really nice, cept the floormats... good work!

just curious, you pay for the system yourself?
Reply
Old Aug 22, 2003 | 04:08 PM
  #8  
JZC's Avatar
JZC
Registered User
 
Joined: Aug 2002
Posts: 632
Likes: 0
From: Strongbadia
Default

Very sweet looking set up.

I woulda gone with a PS2 though.
Reply
Old Aug 22, 2003 | 05:22 PM
  #9  
JimRHIT's Avatar
JimRHIT
Registered User
iTrader: (6)
 
Joined: Mar 2003
Posts: 4,416
Likes: 0
From: Hermosa Beach, CA
Default

Um ..... wow.

Are you satisfied with the sound quality of the system?

How do those (L5 or L7) Solobariks sound? Do you know the internal volume of that box at all? Seems rather small for Kickers...I may be wrong.

I like the head unit, very nice. Had you considered using the nav compartment for a Xenarc screen at all?? It would have cleaned up the dash even more.

The dash and floormats are somewhat flashy, and borderline gaudy, but to each his own.

Are you planning on entering carshows or anything with this style of setup??

"oh ya and didu kno i am only 16, HAHA aret i lucky"

- wonderful, just some advice .. don't make comments like that ... it does not offend me, but others may flame you for acting like that. Yes you are very lucky to have a nice car, but be cool about it, don't brag.

Regardless, you have a very nice setup. Good luck with the Lambo doors and the Veilside kit...please post pics when done with that!!!

Jim
Reply
Old Aug 22, 2003 | 06:24 PM
  #10  
thackattk's Avatar
thackattk
Registered User
 
Joined: Feb 2003
Posts: 407
Likes: 0
From: Largo, Fl
Smile

Hey Zack, this is Mike. I'm the guy with the brick with the lambo doors. Nice to see you made it to this board. My Veilside kit shipped today, but who knows when it's going to be put on. Jerry has to come up with how he wants to paint the car first. We're going to have some fun competing with each other at car shows.
Remember, after the kit and doors are on, stay on your side of town
Reply
Old Aug 22, 2003 | 06:29 PM
  #11  
thackattk's Avatar
thackattk
Registered User
 
Joined: Feb 2003
Posts: 407
Likes: 0
From: Largo, Fl
Default

Here's a nice pic for you
Attached Thumbnails My Full custom system, fiberglass mold an more-lambomodel_1.jpg  
Reply
Old Aug 22, 2003 | 06:57 PM
  #12  
ZackT's Avatar
ZackT
Thread Starter
Registered User
 
Joined: Aug 2003
Posts: 34
Likes: 0
From: st pete florida
Default

Yes i thought about puttin sometin in the nav. compartment but i kept it empty because i am planning on getting that greddy twin turbo kit and that is where the boost controller will go.



The floor matts i dont like too much anymore im going to change them out for new billit floor matts that will hav idonized an colored with an etched out z and dots like the trunk. The Sound quality is excellent, the improvements over stock were phenominal. everything in the car seemed to flow real easy there were no real hard barriors to over come like u do in some cars while installing a sysem. i will keep you posted on updates, thanx for your intrest ,Zack

Last edited by ZackT; Aug 22, 2003 at 07:06 PM.
Reply
Old Aug 22, 2003 | 10:51 PM
  #13  
Mikeb6986's Avatar
Mikeb6986
Registered User
 
Joined: Jun 2003
Posts: 32
Likes: 0
From: Gardena, Cali.
Default

ZackT, Where do you go to get someone to mold fiberglass to your liking?
Reply
Old Aug 23, 2003 | 07:40 AM
  #14  
ares's Avatar
ares
Veteran
Premier Member
iTrader: (2)
 
Joined: Aug 2002
Posts: 10,816
Likes: 2
From: ATL
Default

heh, send me the enclosure, Ill reproduce 10 of em for ya. hah

if there was a custom enclosure that everyone liked, I really probably could duplicate it, would be much cheaper the second time than repeatedly making it custom.
Reply
Old Aug 24, 2003 | 09:18 PM
  #15  
Mikeb6986's Avatar
Mikeb6986
Registered User
 
Joined: Jun 2003
Posts: 32
Likes: 0
From: Gardena, Cali.
Default

Originally posted by ares
heh, send me the enclosure, Ill reproduce 10 of em for ya. hah

if there was a custom enclosure that everyone liked, I really probably could duplicate it, would be much cheaper the second time than repeatedly making it custom.
hey ares, do you think 3 10's could fit under the rear strut bar kinda like ZackT's but 3? i would like to get one molded similar to his but 3 10's and a different molded fit for where the amp is.
do you have a price range for that? thx
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MM'08_350Z
VQ35HR
225
Apr 22, 2021 09:42 PM
sales@czp
Engine
33
Sep 23, 2019 03:30 PM
Extreme Dimensions
Southern California
0
Sep 24, 2015 03:35 PM




All times are GMT -8. The time now is 10:10 AM.