The 2TH PWR Track Car conversion
Congrats! I'm going to just assume you have videos as you usually do. Patiently waiting for vids.. 
Thread Starter
New Member
iTrader: (21)
Joined: Sep 2006
Posts: 8,159
Likes: 107
From: London, Ontario, Canada
hmm made a side by side. Pretty obvious I get smoked every straight away and I brutalised turn 7.
http://youtubedoubler.com/4gN0
http://youtubedoubler.com/4gN0
Thread Starter
New Member
iTrader: (21)
Joined: Sep 2006
Posts: 8,159
Likes: 107
From: London, Ontario, Canada
You know I might not be good enough to say. It may have been that I was just used to the RS3's? The RS3's just felt stickier when they were hot but who knows. But it was a warmer day last time I was out. The Rs3's were probably in the prime of their life. These Dunlops had less than 200 km on them so they probably were pushed before they were ready. I was also roughly 100 pounds lighter last time I was out.
To be able to tell the difference I'd have to be switching and running back to back.
To be able to tell the difference I'd have to be switching and running back to back.
Looks like the you guys represented the Z community well. 
I apologize if this was already covered in this thread, but what devices/apps were used to obtain the lap times, g-force, track layout/gps, etc and what program was used to edit them into the video?
I apologize if this was already covered in this thread, but what devices/apps were used to obtain the lap times, g-force, track layout/gps, etc and what program was used to edit them into the video?
2TH PWR has the AIM Solo and he is using if im right Dashware for the gauge overlap
myself , I have an Aim Solo DL and the video gauge overlap that I am using is RaceRender 2. very nice cheap program
Last edited by XChacalX; Jun 5, 2012 at 04:58 AM.
Thanks for the info. Just curious, but why did you guys choose Aim Solo over others?