Thought i would update from my previous posting that our vendor slidegood has these oem R2-R3-R4-R5 section available for 39 bucks...

SLIDEGOOD:
https://my350z.com/forum/members/147554-slidegood.html
Thread:
https://my350z.com/forum/body-exteri...part-outs.html

SLIDEGOOD SITE:
http://slidegood.com/nissan/350z-200...v03-r2509.html

SLIDEGOOD oem harness on EBAY:
http://cgi.ebay.com/ebaymotors/03-Ni...Q5fAccessories
-J

 

^^^wow - that comes with everything - seriously plug and play action right there - NICE FIND J..!

 

Fellas, I have a 2007 that came w/ the homelink. I'd like to sell it for $30 which will include free shipping. (cept for HI and Alaska)
I just need to know what to give to the buyer aside from the mirror...
Do they need the pigtail that is behind the mirror and plugs up to the mirror? If so no big deal. But I worry that they need alot more then that and if so I won't go through with selling this.
If anyone can chime in thank you in advance.

 

Update I purchased the 08 harness and home link from slide good and will do the install in a few weeks. Looks like the harness should plug directly into the r2 plug and I'll have to remove the stock harness and use the new harness to power the vanity mirrors. I'll keep everyone posted when this is installed.

 

i bought a mirror from an 04-05 and it has 5 wires in the pigtail
i'm trying to wire it in my 06
any help would be appreciated
thanks

 

Just give them the pigtail...they should be able to take it from there...As long as they can wire it up...They will be A-OK..



Your going to need the factory service manual - find the color wire for your car and where they are located..Splice in...and you should be golden..but you have to get a FSM for sure..

 

i have a FSM for my 06 but the mirror has 5 wires and the plug on the A-pillar has only 3 or 4 wires in it
thanks

 

what car did the mirror come from? the other wires may not be needed...either way, here is the wiring diagram for the 06

 

thanks man
i got it, i just have to link it to the opener
i have the FSM and it only shows 3 wires on the mirror connector that's what tricked me

 

^^hell ya...right on!

 

glad to see this thread has helped so many......great work jake..

 

im gonna do this on a close future, but for now i wanna know, is there a olug in the pillars that you can unplug, just like the plug for this, that goes to the dome lights? for example if i wanna throw leds inside my car that i want them to dim with the domes, i just prefer to tap the power from the lowest point that i can, not up from the roof????

 

You can tap into the harness in the A-pillar for footwell lights, but, if you want to be able to switch them on/off manually with the domelight switches, this is the only way:

https://my350z.com/forum/body-interi...different.html

Pretty simple, really, and well worth the minimal extra effort.

 

I'm bumping this because I'd rather bring this back from the dead than to create a new thread.

I just bought the home link mirror for my 07' base and comparing the wire to the diagram acidjake provided... my pigtail harness looks to have all the end points R2-R3-R4-R5. I really hope mine is just a simple plug and play base on JasonZ's post.

 

I can confirm this works for a 2006 base, cable colors and all. Bought a 06 mirror and installed it in 45 mins thanks for this tip OP!!!