ok so i just got my z back together (03 performance) but since the previous owner was going to make a track car out of it the front abs plugs are ripped out and m.i.a. the wires on both ends are still there but i need to know from you tech guys what color go to what colors on the front only the rears were untouched. i just got the ''g'' sensor put back in behind the shifter but all lights were still on vdc, trac, abs, cruise doesnt work! any help would be appreciated. and i did search but i guess not many people have had this problem

 

I'll look tomorrow when i pull my front wheels off for more suspension adjustment

 

is the cable to the ABS box still plugged in?
its the silver aluminum block with several thin metal tubes going to it that is located in the engine bay under the BRAKE cover, near the master cylinder and resevoir.

should be a grey connector that plugs into the ABS controller...

 

Poor Track car, free from abs then......boo.....................

-J

 

yes, all is plugged up at the abs controller under the hood

 

I'll post in a few, i have more ride height crap to play with shortly. Forgot yesterday

 

ok so update time, after talking to a nissan tech he told me that the abs wires do not matter which one they go to because of ac like current they use, so i de-pinned the connectors and wired them up and it worked great, all the lights are now off on the dash and the vdc button now works. Still cruise is not working though, the light comes on but it cant be set. thanks for all the input