For Sale: Tomei Cams - Installed for $1700
Thread Starter
Vendor - Former Vendor
iTrader: (3)
Joined: Jul 2007
Posts: 469
Likes: 3
From: Brampton, ON
We've got a great deal left on a set of cams from our Modified Magazine Cam Shootout.
Just wanted to let you know that we still have one set of cams left from our cam test. We'll sell the cams alone for $1000 or installed for $1700! We'll do an even better deal if you want an ecu tune as well:
Tomei cams, installed with an UpRev flash and dyno tuning for $2300.
Here are the details:
Age: Broken in only. Run in our racecar for approx 1hr on the dyno and then removed.
Fits: Non Revup VQ's ('03-'05.5)
Spec: Duration: IN+EXH: 264 Lift: 10.5mm IN+EXH
Max RPM: 6800rpm with stock valve springs, 7500+ with Tomei or JWT valve springs (stock block good for 7000-7200rpm MAX)
You can see how the cams did on the Modified Magazine shootout here:
https://my350z.com/forum/na-builds/4...se-cams-7.html
Thanks guys, act fast! These will work best if you have headers, and an exhaust. They are also a great mod for those that are supercharged or turbocharged. The labor rate I quoted is for NA applications only!
Email or PM.
sanis@sg-motorsport.com
Just wanted to let you know that we still have one set of cams left from our cam test. We'll sell the cams alone for $1000 or installed for $1700! We'll do an even better deal if you want an ecu tune as well:
Tomei cams, installed with an UpRev flash and dyno tuning for $2300.
Here are the details:
Age: Broken in only. Run in our racecar for approx 1hr on the dyno and then removed.
Fits: Non Revup VQ's ('03-'05.5)
Spec: Duration: IN+EXH: 264 Lift: 10.5mm IN+EXH
Max RPM: 6800rpm with stock valve springs, 7500+ with Tomei or JWT valve springs (stock block good for 7000-7200rpm MAX)
You can see how the cams did on the Modified Magazine shootout here:
https://my350z.com/forum/na-builds/4...se-cams-7.html
Thanks guys, act fast! These will work best if you have headers, and an exhaust. They are also a great mod for those that are supercharged or turbocharged. The labor rate I quoted is for NA applications only!
Email or PM.
sanis@sg-motorsport.com
Thread Starter
Vendor - Former Vendor
iTrader: (3)
Joined: Jul 2007
Posts: 469
Likes: 3
From: Brampton, ON
Thanks guys!
We're doing a high lift / high duration cam test soon, that should be really exciting and make for some big power numbers. Then it's time for some head and intake manifold porting.
We're doing a high lift / high duration cam test soon, that should be really exciting and make for some big power numbers. Then it's time for some head and intake manifold porting.
Sash, sent you an email last week about the cams. Still haven't heard back! Possible your response may have gotten blocked by our filters. I'll take the Tomei Cams off your hands. Don't suppose you have Tomei valve springs I could take off your hands as well?
Rob
Rob
Last edited by Rated Z; Nov 21, 2010 at 06:56 AM. Reason: wording
Trending Topics
Thread Starter
Vendor - Former Vendor
iTrader: (3)
Joined: Jul 2007
Posts: 469
Likes: 3
From: Brampton, ON
Hey Rob,
That email never came through! I have all of my junk mail settings to 0, so I should have got it.
We can order the Tomei springs for you no problem, they will take approx 5-7 business days to come in.
Try me again and if it doesn't work just PM me here.
Thanks!
Sasha Anis
SG-Motorsport.com
That email never came through! I have all of my junk mail settings to 0, so I should have got it.
We can order the Tomei springs for you no problem, they will take approx 5-7 business days to come in.
Try me again and if it doesn't work just PM me here.
Thanks!
Sasha Anis
SG-Motorsport.com
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM





