name your 1/4 run and mods you have
Hi im new to this whole 350z thing. Im getting a 350z anniversary edition and i want to know some of the mods you guys have. This can be very useful to me. And also if it's not too much trouble i would really like to know what u run on a 1/4 mile. Im getting the 350z in the middle of August so fast responses would'nt hurt
. thanks
. thanks
Last edited by styles; Feb 29, 2008 at 11:26 AM.
1/4 runs are going to vary a lot just by altitude, outside temp, humidity, and even fuel octane used.
Some people run stock Z's at 13.9's and if they were in a different environment could run the same car at 13.6-13.7
Some people run stock Z's at 13.9's and if they were in a different environment could run the same car at 13.6-13.7
First off, you need to learn just because somebody has a certian mods list, even you if replicate it, even add to it in some cases you may not come close to running their times. With that being said:
13.77 @ 101.4 stock-was my 2nd pass ever in the car. First pass ever in my stock Z was a 2.1 60ft, 13.80 @ 100.8
Now with : jwt pop-charger, crawford plenum, ur crank pulley, test-pipes, injen exhaust, and technosquare ecu.
I picked up 23whp over stock, and with a HORRIBLE 2.2 60ft, I went 13.58 @ 106. My regular 2.0 60ft on street tires would be around a 13.2, but I only ran on street tires 1X this day. With the same set-up and a 1.96 60ft(1st time on slicks-and yes this 60ft sucks huge donkey d!ck) I went 13.13 @ 107, backed it up with a 13.16 @ 106.
Best mod for any car, especially for drag racing-LEARN TO DRIVE YOUR CAR TO ITS FULLEST POTENTIAL
13.77 @ 101.4 stock-was my 2nd pass ever in the car. First pass ever in my stock Z was a 2.1 60ft, 13.80 @ 100.8
Now with : jwt pop-charger, crawford plenum, ur crank pulley, test-pipes, injen exhaust, and technosquare ecu.
I picked up 23whp over stock, and with a HORRIBLE 2.2 60ft, I went 13.58 @ 106. My regular 2.0 60ft on street tires would be around a 13.2, but I only ran on street tires 1X this day. With the same set-up and a 1.96 60ft(1st time on slicks-and yes this 60ft sucks huge donkey d!ck) I went 13.13 @ 107, backed it up with a 13.16 @ 106.
Best mod for any car, especially for drag racing-LEARN TO DRIVE YOUR CAR TO ITS FULLEST POTENTIAL
Last edited by Alberto; Jul 20, 2005 at 11:20 AM.
Originally Posted by styles
Hi I'm new to this whole 350z thing. I'm getting a 350z anniversary edition and I want to know some of the mods you guys have. This can be very useful to me. And also if it's not too much trouble I would really like to know what you run on a 1/4 mile. I'm getting the 350z anniversary edition in the middle of August so fast responses would'nt hurt
. thanks
. thanks
Originally Posted by styles

well any ways I ran a 13.9 stock @ 100.1 and run a 13.6 now @ 103 my mods are CAI, Test pipes, borla TD and kinetix upper plenum
Trending Topics
Originally Posted by supra crazy
And the reason for telling every one your 17 was?
shhh give him a break, that's just what 17 year olds do - tell everyone they're 17 before proceding to talk about something.
Pulls up to taco bell drive thru, "hi I'm 17. I want 3 tacos. thanks"
Originally Posted by sentry65
shhh give him a break, that's just what 17 year olds do - tell everyone they're 17 before proceding to talk about something.
Pulls up to taco bell drive thru, "hi I'm 17. I want 3 tacos. thanks"
Pulls up to taco bell drive thru, "hi I'm 17. I want 3 tacos. thanks"
On a side note. Cut him some slack.
Originally Posted by Diesel350
Alberto,
Can you give us some tips on shifting?
Can you give us some tips on shifting?
Everybody has fast hands, Id say work on kicking down the clutch faster and faster, in other words leg speed. I only push the clutch in about 1/2 when I race, I start moving my right hand maybe a fraction of a second before I start kicking my left foot down on the clutch, then I hit the clutch as I glide into the next gear and get off the clutch quick. Works for me
Originally Posted by Alberto
Sure first off you dont have to powershift to be a good driver. I do it cuz Im comfortable with it, and when I lift throttle in between shifts it slows me up.
Everybody has fast hands, Id say work on kicking down the clutch faster and faster, in other words leg speed. I only push the clutch in about 1/2 when I race, I start moving my right hand maybe a fraction of a second before I start kicking my left foot down on the clutch, then I hit the clutch as I glide into the next gear and get off the clutch quick. Works for me
Best advice is practice practice practice. When learning to race I was always hard on myself, trying to make my shifts faster. I still do...you can always get better imo.
Everybody has fast hands, Id say work on kicking down the clutch faster and faster, in other words leg speed. I only push the clutch in about 1/2 when I race, I start moving my right hand maybe a fraction of a second before I start kicking my left foot down on the clutch, then I hit the clutch as I glide into the next gear and get off the clutch quick. Works for me
13.8x@ 105.1x mph and 2.3x 60ft
no powershifting, slight backwind
mods
AAM spacer
INJEN SES
UR crank pulley
GruppeM intake
Grounding kit
some weight reduction (spare, battery, no washer fluid)
no powershifting, slight backwind
mods
AAM spacer
INJEN SES
UR crank pulley
GruppeM intake
Grounding kit
some weight reduction (spare, battery, no washer fluid)
Thread
Thread Starter
Forum
Replies
Last Post
Tochigi_236
Feedback & Suggestions for Our Forum
8
Sep 27, 2015 03:40 PM




