When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
If you dyno on a load base dyno . You can run it in third . You can get to WOT by 3200rpm with out it down shifting . We do use manual , but it will still down shift
You must be doing something else than a standard DYNO run, I'm lost...
Danny
Try putting the car in third and get the rpm's at around 1500 to 2000rpm's . Then floor it without hesitation....it will down shift . If it doesnt..there is some thing wrong.
Try putting the car in third and get the rpm's at around 1500 to 2000rpm's . Then floor it without hesitation....it will down shift . If it doesnt..there is some thing wrong.
In automatic it does immediately, but if I'm in manual, it doesn't...
I had my trans program re-done by dealer and old and new program cause it to down shift at low RPM in manual. I was not able to tune below 3500 before which made car slugish of the line. I have the E-manage ultimate now and want the best tune I can get!