Biggest Off the Shelf cams avail?
#5
Registered User
iTrader: (4)
Join Date: Sep 2002
Location: Who wants a dyno?
Posts: 1,779
Likes: 0
Received 0 Likes
on
0 Posts
NISMO has cam blanks available.
If you spend the $$ to run the RZZ heads you can run the S2 NISMO cams.
FI use, Tomei 268.
This is your 1 time get out of Noob free card. The search function is your friend.
If you spend the $$ to run the RZZ heads you can run the S2 NISMO cams.
FI use, Tomei 268.
This is your 1 time get out of Noob free card. The search function is your friend.
Trending Topics
#9
Registered User
Thread Starter
Join Date: Apr 2006
Location: Out There --->
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Noob? I've just had a look at some of your posts on this forum.. pot.. meet kettle..
I'll admit, I've done little VQ work, but before you start calling someone a noob, you should maybe have some idea of what they actually do for a living.
268 are no where near big enough.
Nismo blanks AFAIK are too small for what we need - am in contact to see if they have anythign special laying around.
Looking at 290 11.5-13mm lift (without having to custom build them)
I'll admit, I've done little VQ work, but before you start calling someone a noob, you should maybe have some idea of what they actually do for a living.
268 are no where near big enough.
Nismo blanks AFAIK are too small for what we need - am in contact to see if they have anythign special laying around.
Looking at 290 11.5-13mm lift (without having to custom build them)
#10
Registered User
iTrader: (61)
Originally Posted by Spanners
Noob? I've just had a look at some of your posts on this forum.. pot.. meet kettle..
I'll admit, I've done little VQ work, but before you start calling someone a noob, you should maybe have some idea of what they actually do for a living.
268 are no where near big enough.
Nismo blanks AFAIK are too small for what we need - am in contact to see if they have anythign special laying around.
Looking at 290 11.5-13mm lift (without having to custom build them)
I'll admit, I've done little VQ work, but before you start calling someone a noob, you should maybe have some idea of what they actually do for a living.
268 are no where near big enough.
Nismo blanks AFAIK are too small for what we need - am in contact to see if they have anythign special laying around.
Looking at 290 11.5-13mm lift (without having to custom build them)
#12
Registered User
Thread Starter
Join Date: Apr 2006
Location: Out There --->
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
97supratt - You're still a **** -I spent 2 hrs looking last nite.. I'm sure its out there somewhere.....
done12many2 - Lol.. I realise that... looking for all options in the range.. though I doubt we'll find anything in the top region, hence why I asked.
What are we tring to do?? Sub 7's @ 200+
done12many2 - Lol.. I realise that... looking for all options in the range.. though I doubt we'll find anything in the top region, hence why I asked.
What are we tring to do?? Sub 7's @ 200+
#13
Registered User
iTrader: (2)
Join Date: Sep 2002
Location: Nashville, TN
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
We have 292 11 mm lift intake cams if your interested they will work with stock valve springs and heads call me 615-327-4159
Last edited by dougrace zs; 06-06-2006 at 02:58 PM.
#14
Registered User
iTrader: (2)
Join Date: Apr 2005
Location: Connecticut
Posts: 576
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dougrace zs
We have 292 11 mm lift intake cams if your interested they will work with stock valve springs and heads call me 615-327-4159
K
#15
Originally Posted by Spanners
Noob? I've just had a look at some of your posts on this forum.. pot.. meet kettle..
I'll admit, I've done little VQ work, but before you start calling someone a noob, you should maybe have some idea of what they actually do for a living.
268 are no where near big enough.
Nismo blanks AFAIK are too small for what we need - am in contact to see if they have anythign special laying around.
Looking at 290 11.5-13mm lift (without having to custom build them)
I'll admit, I've done little VQ work, but before you start calling someone a noob, you should maybe have some idea of what they actually do for a living.
268 are no where near big enough.
Nismo blanks AFAIK are too small for what we need - am in contact to see if they have anythign special laying around.
Looking at 290 11.5-13mm lift (without having to custom build them)
1st Part# 1300F-RRVQL Work angle up to 284, Lift up to 11mm
2nd Part # 1300F-RRVQH Work angle up to 312, Lift up to 14mm
#17
Registered User
iTrader: (61)
Originally Posted by Spanners
97supratt - You're still a **** -I spent 2 hrs looking last nite.. I'm sure its out there somewhere.....
done12many2 - Lol.. I realise that... looking for all options in the range.. though I doubt we'll find anything in the top region, hence why I asked.
What are we tring to do?? Sub 7's @ 200+
done12many2 - Lol.. I realise that... looking for all options in the range.. though I doubt we'll find anything in the top region, hence why I asked.
What are we tring to do?? Sub 7's @ 200+
Noob
#19
Former Sponsor
iTrader: (564)
Join Date: Feb 2003
Location: Long Island, New York
Posts: 19,266
Likes: 0
Received 5 Likes
on
5 Posts
no off the shelf cam is going to get you where you want to be spec wise, but you can come close
you canot use anywhere near a 13mm lift without new pistons, springs, valves, etc etc etc.
The NISMO Type B Blanks can be ground to a max of 312 degrees of duration and .551 " lift. These are blanks that you would then need to have ground to spec.
I don't see how 11.0mm of lift would work with stock springs...you cannot even use stock springs on Tomei 268's (stock springs do not have enough travel)...but that's a different topic . The max a NISMO spring can travel is what a Tomei 268 has lift wise. I know this because we originally were going to use the NISMO springs with the NISMO Spec 2 cams on Kwame's car, and now will be going to Supertech duals.
Further, if this is a forced induction car, you are not going to need to worry as much about duration as lift.
you canot use anywhere near a 13mm lift without new pistons, springs, valves, etc etc etc.
The NISMO Type B Blanks can be ground to a max of 312 degrees of duration and .551 " lift. These are blanks that you would then need to have ground to spec.
I don't see how 11.0mm of lift would work with stock springs...you cannot even use stock springs on Tomei 268's (stock springs do not have enough travel)...but that's a different topic . The max a NISMO spring can travel is what a Tomei 268 has lift wise. I know this because we originally were going to use the NISMO springs with the NISMO Spec 2 cams on Kwame's car, and now will be going to Supertech duals.
Further, if this is a forced induction car, you are not going to need to worry as much about duration as lift.
Last edited by Z1 Performance; 06-06-2006 at 03:40 PM.