hey guys i've been searching like crazy on here and i cant seem to find the info that im looking for. i have the ppw 2005 base 350z and i want to put the entusiast and up lsd in my car.. will it fit?? do i need the pumpkin and out- put shafts also? thanks for ur help sorry if this is in the wrong place

 

Best bet is a pumpkin swap, don't waste your $$$ trying to do the swap with parts unless your going with a clutch type and then get the Nismo since it comes with all the required parts.

 

when you mean pumpkin swap, you mean just replacing the whole dif. correct? or do you still need the stubs?

 

From what I understand you need a full pumpkin with output stubs. The nismo kit comes with everything you need.

 

thanks guys for ur help.... (answer to above ??)i planned to replace it with the whole pumpkin and shatfs from another 350 higher model (than base), i was just curious if it was direct bolt in or not? i dont want to spend 1000 on a nismo im not looking to race i just think it would be nice to have an lsd in my car. thanks again

 

Im looking to do the exact same thing. Let me know!

 

will do

 

you need the pumpkin and the stub axles (usually they are already inserted in the diff when you buy a used one), and that's it. Easy swap!

 

thanks

 

what exactly do you need when going from a base (open diff) to a non-nismo aftermarket LSD?

 

Stub axles ment for a LSD equipped car. New bearings and seal's would be a very good idea while the diff is apart.

 

Get the Quaife LSD and save your self headaches. It is a direct drop in for Base model Z.