97supratt

iTrader: (61)

REVUP motors can rev to 7500 so I should be okay with the JWT s2 cams and minor headwork with crawford headers. I'm not going to incredible numbers here, just want some umf.

Z1 Performance

iTrader: (564)

gotcha..didnt know it was a revup

97supratt

iTrader: (61)

Yup, or else I wouldn't even try it.

On a side note can you PM me your best price on the GT spec rear lateral bar since I bought a few GT spec stuff from Z1 I thought you guys might have good deals on this as well. Thanks

rocks

iTrader: (1)

Fuel cut on the revup is right at 7200rpms according to utec logs when i had my utec. So 7500rpms shouldnt be a problem

warmmilk

iTrader: (5)

what are the specs on the cams in jeremy's motor right now?

maximumsportZ

iTrader: (25)

I believe they're stock ??

warmmilk

iTrader: (5)

i thought he had some mild jwt cams???

BigBodySmith

You cant really compare the K20 to the VQ, which has already been said.

I used to build all motor Honda's, making like 215whp out of 1.8ltrs, roughly making 120whp per liter. Id really like to see this out of the VQ, but again, this is unchartered territories for the 350z owners, of coarse daily driven. I think in the near future, when more people start experimenting you will see daily driven VQs above 300whp, working most of the turbo 350s at the track.

Props to Audible, for being innovative and being the guinea pig. I respect that, and in the future, I will probably do business with you, being you know this motor so well.

MI 35th

iTrader: (16)

NA grand-am cup series spec motors mustang dyno around 375whp...

This is very impressive that jeremy was able to produce such a stout motor with so much room for improvement...

ie. Cosworth plenum, better cams, more tuning.

The fact of the matter is jeremy isnt a multi national corp. sponsoring a race car, he's one guy making a difference.

As for the k series making 318. those numbers came from a sleeved stroked 2.7 liter ERL block motor with almost 10K into it hardly a cheap way to go, it was dry sumped and revved to 9000rpm not to mention they were dynojet #s not taking into effect the sae correction. this is a race breed motor and the facts arent 100% straight. Also the Kseries was ITBs and similar compression to jeremy on race gas. THe tq wasnt actually that bad considering it was being installed in an race prepped rsx.

Audible Mayhem

iTrader: (48)

thanks man, still boring though, i am a drag racer, all motor credibility isnt all i figured it up to be, its all about who is the fastest!!

ZU L8R

iTrader: (84)

JWT S1 cams

Resolute

iTrader: (2)

Do you have a dyno sheet somewhere or a link with that info? Because Unitech claims their Grand-Am engines are only 350hp at the crank, tops. GA rules prohibit half the things Jeremy has already done, so to make an even 100hp/L with what is essentially a stock VQ engine with stock CR and IM, they figured was pretty good. I don't blame them.
Will

turbo-maxima

Umm let me find some pictures of this VQ. There was a guy who worked for a race team and he had a 3.0 VQ making 400+ horsepower N/A at 9000 rpm. He switched to a 3.5 about a year ago but I have not kept in contact with him.

Edit: can't seem to find them. Anyone know what Im talking about? Rear mounted VQ30DE in a tube chasis car with Individual throttle bodies. And Im pretty sure Nismo was selling 450 hp crate engines for awhile.

Resolute

iTrader: (2)

Well the IES guys have several VQ's making that much power and they have it for braced for a custom mid-engine option as well. Maybe it was one of their engines you saw that a guy bought. Nismo was selling their 450hp (unrestricted) VQ35 engines for a while as well.
Will

Alberto

iTrader: (14)

Wait till you extract another 50whp out of this thing and run it down the 1/4. You will put 90% of TT guys to shame

Audible Mayhem

iTrader: (48)

i will be way too bored by then, i think a 200 shot will take care of everyone...


hehe


i need some cams but i hate waiting, the cams i need arent really sitting on the shelf anywhere. hopefully when i talk to brian crower tomorrow, he can get mine ground for me...

we will see

bacalhau16

iTrader: (32)

I thought someone was already grinding away some cams for you. Your patience will also help us all understand what an N/A Z is really capable of. You have a really good setup so far, you've got to keep it going! Hopefully crower can put something together for you!

ZTMYDUST

iTrader: (13)

I have no clue what this thread is about but whatever guy in the beginning was bashing an RSX I salute you.

Audible Mayhem

iTrader: (48)

lol, basically he wanted to not pollute my thread with negativity and it worked!!