Z33Art V3.0-LS1/TH400 Swap
04-05-2011, 06:18 PM
#181
Registered User
iTrader: (1)
Join Date: Apr 2008
Location: Nampa, Idaho
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Sorry guess I phrased that wrong... I wasn't sure if the placement was in that position so that you would be able to use the factory shift cable or if you had to modify the linkage at the transmission where the cable mounts up.
Were you able to use the factory shift cable or did you go with an aftermarket kit?
As far as the weight distribution, do you have any 4 corner weight comparisons?
Were you able to use the factory shift cable or did you go with an aftermarket kit?
As far as the weight distribution, do you have any 4 corner weight comparisons?
Last edited by Nebiros; 04-05-2011 at 06:48 PM. Reason: addi another question
04-11-2011, 04:31 AM
#184
Just some pictures from over the last month or two. Have a bunch more updates but I am waiting until they are completely finished to post them.
Welded in solid subframe bushings
My new gauge and switch panel where the radio was. Air/Fuel gauge and vacuum/boost gauge. The switches are main power relay, data log, nitrous and wideband calibration. Each switch will have an indicator LED by it also which aren't shown in the picture. There will also be an error code indicator between the gauges. Still have to space the panel out correctly so it sits flush, but you get the concept.
Welded in solid subframe bushings
My new gauge and switch panel where the radio was. Air/Fuel gauge and vacuum/boost gauge. The switches are main power relay, data log, nitrous and wideband calibration. Each switch will have an indicator LED by it also which aren't shown in the picture. There will also be an error code indicator between the gauges. Still have to space the panel out correctly so it sits flush, but you get the concept.
05-19-2011, 09:01 AM
#187
My old Howe radiator had a couple of coolant passages that had slowly become crimped from the zip ties for mounting fans. Decided I wanted a slightly bigger radiator also since I run an underdrive pulley and my water pump is going slower.
05-22-2011, 04:47 AM
#194
So I finally moved into my new house this week and the Z got delivered! Sitting in her new home with the new larger Howe radiator and and Clocks Off Racing tubular radiator mount.
Pictures of the finished cage also.
Pictures of the finished cage also.
Last edited by Quamen; 05-22-2011 at 05:07 AM.
05-30-2011, 05:37 PM
#197
The garage is awesome! I am still working on finishing the cabinets I made but everything else is good to go in the garage. Still have to buy some shelving and finish putting stuff away from the move though so it is kind of a mess right now.
