Full Build Questions... Big Horsepower Project ( 700rwhp )
Kid I sold it to a friend I told you... And I wasn't " needing " cash you reject I bought a Ferrari F430 lmao, scrub..
And for the record kid, Evo's suck lol and the majority of people online are haters
And for the record kid, Evo's suck lol and the majority of people online are haters
I'm welllll known kid I talk chit and back it up lol ( for fun though they were good times ).. Your sitting on the secluded island right now Jerry with your slow Z thinking your doing something... You never felt adrenaline kid. Little kitten
Lol that was 4-5 years ago, but I was the youngest little punk there with a big mouth so they all know me around Chicago lmao. I fought too and beat up a few older guys ( not SP racing lol, SP racing is cool and have bad *** cars but they just can't drive them right, stick to dyno vids
lolll you don't want none of this )... Look at me bloating and chit right now lol I'm getting back into it right now.. lol..
Anyway I'm not that Kayfunk kid so Jerry your wrong about that as well as wrong about every other stereotypical comment spewing through your little rambo warrior fingers lol you make laugh though..
lolll you don't want none of this )... Look at me bloating and chit right now lol I'm getting back into it right now.. lol.. Anyway I'm not that Kayfunk kid so Jerry your wrong about that as well as wrong about every other stereotypical comment spewing through your little rambo warrior fingers lol you make laugh though..
Last edited by Status007; May 16, 2013 at 02:57 PM.
Sick *** wheels though whats the wheels size and offset? That is definitely formidable power and look forward to seeing it complete. What is your goal for the car currently?
As far as the radiator I have a contact in Denver who's son is on a nascar team (iirc, gibbs busch) and he basically liquidates track used radiators - the one I'm using was actually purchased off ebay - I didnt mind buying it used, got a pretty good deal on it, it was tested and it's exactly what I want (combo setup, AN fittings, C&R racing name brand, right size, etc). Scope the internet for them - they're available…
20" TWS Indy 500…I bought them before I put a emphasis on rotational mass…I'm torn between 'show & go' …
I have the IPP stage 3 block, good for 650...my goal is 600whp…my own-worst-enemy is that I'm in colorado and I lose 10% power right off the bat due to elevation…I think I need 24 to 26psi to get there…
I'm looking forward to being done too but I love being able to spend a few hours here & there in the garage fab'ing things up, making hoses, moving things around in the car/engine bay, bolting things together…it feeds my mechanical and creative side all in and one - sorta stress relieving...
Last edited by bealljk; May 16, 2013 at 03:20 PM.
If SP racing would like to avenge their loss they will need more than a trunk full of battery's and some tater-tots that is for sure...
BTW - That video I posted was done a closed, private, sanctioned road with paramedics and emergency services on scene, to clear up any confusion
BTW - That video I posted was done a closed, private, sanctioned road with paramedics and emergency services on scene, to clear up any confusion
hey cux take a look at what i found, knew i saw it before, he sold a bike too and cts-v looked like he was hurting for cash. too bad its someone different from a completely different state. might be the same person but he was laughed off the six speed too, and all his **** just magically sold when people inquired about it.
http://www.6speedonline.com/forums/a...53k-takes.html
http://www.6speedonline.com/forums/a...53k-takes.html
100k in that car............hmm no thanks.
Stock looking interior and oem engine bay. Sold for 53k....insane. Thats corvette money.
Probably only surrounded by people that like him for his money.
I'm running the haltech as well…there are a handful of options out there but it seemed to be the most widely used on bigger builds and if I run into problems the last platform I want is one that no-one is using…
As far as the radiator I have a contact in Denver who's son is on a nascar team (iirc, gibbs busch) and he basically liquidates track used radiators - the one I'm using was actually purchased off ebay - I didnt mind buying it used, got a pretty good deal on it, it was tested and it's exactly what I want (combo setup, AN fittings, C&R racing name brand, right size, etc). Scope the internet for them - they're available…
20" TWS Indy 500…I bought them before I put a emphasis on rotational mass…I'm torn between 'show & go' …
I have the IPP stage 3 block, good for 650...my goal is 600whp…my own-worst-enemy is that I'm in colorado and I lose 10% power right off the bat due to elevation…I think I need 24 to 26psi to get there…
I'm looking forward to being done too but I love being able to spend a few hours here & there in the garage fab'ing things up, making hoses, moving things around in the car/engine bay, bolting things together…it feeds my mechanical and creative side all in and one - sorta stress relieving...
As far as the radiator I have a contact in Denver who's son is on a nascar team (iirc, gibbs busch) and he basically liquidates track used radiators - the one I'm using was actually purchased off ebay - I didnt mind buying it used, got a pretty good deal on it, it was tested and it's exactly what I want (combo setup, AN fittings, C&R racing name brand, right size, etc). Scope the internet for them - they're available…
20" TWS Indy 500…I bought them before I put a emphasis on rotational mass…I'm torn between 'show & go' …
I have the IPP stage 3 block, good for 650...my goal is 600whp…my own-worst-enemy is that I'm in colorado and I lose 10% power right off the bat due to elevation…I think I need 24 to 26psi to get there…
I'm looking forward to being done too but I love being able to spend a few hours here & there in the garage fab'ing things up, making hoses, moving things around in the car/engine bay, bolting things together…it feeds my mechanical and creative side all in and one - sorta stress relieving...
Thats real cool man, looking forward to seeing the finished product. I sent you a PM regarding the radiators I don't know if that would be a viable option or not but read it when you have time and let me know
Like i said though I don't think its the same person remember how he was claiming he only spent 9k5 on it and sold it because he didnt want to replace the trans and diff? At best he knows someone with the car and trying to pawn it off as his own. Plenty of those around, plus watch the video he posted trying to act all harass? One turbo and one bov when they let off lol never saw a 1k hp car twin. Turbo car that didn't run turbos or bov also funny how he is getting butt hurt about us not addressing him anymore lol
Last edited by jerryd87; May 16, 2013 at 04:37 PM.
Jerry - I was the one recording it you momo, that was when I was 19 years old and I was the camera man... " Jerry, Jerry, Jerry " lmao you nerd.. Of course I was excited, but I did not even have a full set of facial hair back then either lol. Even when I was just 19 I held my own in mutual combat as well as the streets little boy you don't even know kid... Anyway I don't think I would ever do the same things I did when I was 19... I'm almost 26 now... Just goes to show how long I been around boy... Respected at 19 I can't be broken kid, undefeated too! Lmao just sit down, watch and take some notes little gerber baby... Learn something serpent
In this guy's defense, he did say $9500 in LABOR costs, not parts. I think everyone missed that part.
Status, you must have ADD or something. Your thought process is all over the place and you really enjoy clowning on people excessively. That's why people don't know if they should take this thread seriously or not.
This could be a cool build thread if it didn't have so much mindless drivel in it.
Status, you must have ADD or something. Your thought process is all over the place and you really enjoy clowning on people excessively. That's why people don't know if they should take this thread seriously or not.
This could be a cool build thread if it didn't have so much mindless drivel in it.
In this guy's defense, he did say $9500 in LABOR costs, not parts. I think everyone missed that part.
Status, you must have ADD or something. Your thought process is all over the place and you really enjoy clowning on people excessively. That's why people don't know if they should take this thread seriously or not.
This could be a cool build thread if it didn't have so much mindless drivel in it.
Status, you must have ADD or something. Your thought process is all over the place and you really enjoy clowning on people excessively. That's why people don't know if they should take this thread seriously or not.
This could be a cool build thread if it didn't have so much mindless drivel in it.
I'm actually just going to use this thread as a source of information and do a build thread when I start the process here soon
i think the point your missing is nothing he says adds up and is full of ****. claimed earlier he was born in 88, says he is almost 26(he would have been born in 87 to almost be 26, im almost 26 and was born in july 87) has listed a couple different prices listed about it between here and other sites. did you even watch a video, dude dosnt even know what he has raced "twin turbo corvette" has no turbos or bov in fact cant find **** about a 1k+hp twin turbo sp vette thats not something that escapes notice about a shop back in 07 when that was still considered pretty damn good(although i could be wrong but i doubt it). claims to be so awesome and knowledgeable about cars but has to ask simple questions, and was already laughed off some other forums. or like his comments about evos sucking when the fact we all know is how many track record do z cars hold and how many do evos hold lol im sure if i cared enough to search we could probably find a thread of him getting laughed off evo forums too.
dude dosnt actually own ****, ill buy he knows someone or met someone who owned that stuff but not himself. its nothing more then a troll thread we where having a little fun with before the mods lock it as per usual with the FI guys. this **** pops up all the time in there, notice how he cant post anything verifying he has what he has claimed? hence why is was ridiculed other places also.
edit also if he was so made dont see why he skipped the all out build that where suggested to him on other forums when he was "in the market" for them
dude dosnt actually own ****, ill buy he knows someone or met someone who owned that stuff but not himself. its nothing more then a troll thread we where having a little fun with before the mods lock it as per usual with the FI guys. this **** pops up all the time in there, notice how he cant post anything verifying he has what he has claimed? hence why is was ridiculed other places also.
edit also if he was so made dont see why he skipped the all out build that where suggested to him on other forums when he was "in the market" for them
In this guy's defense, he did say $9500 in LABOR costs, not parts. I think everyone missed that part.
Status, you must have ADD or something. Your thought process is all over the place and you really enjoy clowning on people excessively. That's why people don't know if they should take this thread seriously or not.
This could be a cool build thread if it didn't have so much mindless drivel in it.
Status, you must have ADD or something. Your thought process is all over the place and you really enjoy clowning on people excessively. That's why people don't know if they should take this thread seriously or not.
This could be a cool build thread if it didn't have so much mindless drivel in it.
Last edited by jerryd87; May 16, 2013 at 06:05 PM.
How about you? You have any true friends? Or just a hate parade of who is the shiniest lolll... For real bro you live in a bubble coming at me so hard all the time lol.. We make fun of fake individuals such like yourself all the time, in all seriousness the joke is on you.. Anyway you don't even know what a good friend is kid, you chill with the cookies and cream crew... Softy trying to act hard and analytic loll. You can't even wash your hands in lake Michigan your going to make a stereotype of my life lol... GTFO









