Anyone buy and install a short shifter?
Im a little mechanicly inclined, can i install it myself?
Where is the best place to purchase?
Thanx all
CHas

 

PM KYJ9...

He has had LOTS of experience with short shifters.

 

Bought mine from 350evo.com. It got to me very quickly and for the same price and cheaper shipping than it would have cost through rogue engineering. You shouldn't have to much trouble swapping out the shifters although getting under the Z isn't too easy. The instruction manual was very detailed and I finished up in about an hour and I am sure you're more mechanically inclined than I am.

 

Rogue Engineer Short shifter.
They have been updated and everyone....(with one exception) seems very satisfied.
BJ@350EVO.com

 

everyone is indeed happy with them except that guy who could have gotten an update but didnt get one. All i have heard are good things besides that.

 

I have the Rogue Shifting. I got mine directly from Ben at Rogue when I picked it up. As for the install, it really doesn't take much skill to get it, unscrewing a few things here and there and thats it.

The hardest part is getting the car up but if you look around there are explanations as to how to get the car off the ground so you can get under and get the one bolt holding the old shifter in place.

Youll love the RE ssk but some are waiting for alternatives

 

i picked mine up from ben too. installation was a piece of cake, but you have get under the car for one part.

 

do a search, i wrote a big review a while ago on mine. i LOVE it!! you should read the review though.

 

Rogue Short Shifter is a must it make it so much better...feels like a STI shifter....so good...with the MOMO shift **** is alsome
it is pretty easy to install is just that u need to lift up the car a bit... i would do it myself but i dun have the tools

 

is there a nismo short shifter out there???

 

RE Short shifter! You can get it at 350evo.com.

 

do your shiftknobs vibrate a lot or rattle?

 

yea it did rattle because the collar betweent the shifter and **** is not tight enough since the shift **** sits too high to hold it in place...and since also the stock **** looks weird when it sits that high so i switched to MOMO