Horse power gains with these mods....
07-09-2004, 05:00 AM
#21
Registered User
Thread Starter
Join Date: Jul 2004
Location: US
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Zmego1985
My auto z with just a intake is putting down 240 at the wheels. So with crawford plenum, crawford headers, crawford high flow cats, injen dual exhaust, 350 evo throttle body, underdrive pulley. grounding kit, and ecu reflash i hope to have high 280's.
My auto z with just a intake is putting down 240 at the wheels. So with crawford plenum, crawford headers, crawford high flow cats, injen dual exhaust, 350 evo throttle body, underdrive pulley. grounding kit, and ecu reflash i hope to have high 280's.
Are you saying that if I don't get the ECU reflash with all of those mods I won't get the full power from those mods? Doesn't the ECU flash mess up the configuration for the car and things stop working?
07-09-2004, 05:51 AM
#22
Registered User
iTrader: (1)
Join Date: Oct 2002
Location: Houston, TX
Posts: 829
Likes: 0
Received 0 Likes
on
0 Posts
all the reflash does is alter the fuel maps and change the timing of the engine.... Technosquare is one company doing this with the 350Z ECU and they have a new map for all different combinations of aftermarket parts... this helps you take advantage of the mods you make.
For real gains without going to forced induction, you will need cams and/or new heads (along with an ECU flash that will take advantage of the mods)
For real gains without going to forced induction, you will need cams and/or new heads (along with an ECU flash that will take advantage of the mods)
Thread
Thread Starter
Forum
Replies
Last Post
