FS: JWT S1 Camshafts
JWT S1 Camshafts
JWT S1 Camshafts. Installed for only 10,000 miles (Have invoices to prove)
$700 shipped.
Professionally installed and uninstalled by Z Car Garage and Rebello Racing. These were swapped out during my motor build and have been inspected.
$700 shipped.
Professionally installed and uninstalled by Z Car Garage and Rebello Racing. These were swapped out during my motor build and have been inspected.
The JWT S1 VQ35DE Upgraded Cams for the 2003-2005 Nissan 350z are 260 DEG DUR. / .428"(10.9MM) LIFT and Advance the intake cams by 2 Degrees. These cams are prefect for forced induction on a daily and occasionally track driven 350z.
** NOTE: THIS CAM UPGRADE MAY REQUIRE THE IDLE RPM BE SET TO 850 RPM TO PREVENT POSSIBLE STALLING AT IDLE. If idle cannot be increased, a reflash or other modifications may be necessary to get a firm idle.
*** Will NOT work on the 2005-2006 VQ35DE Rev up motor with the exhaust cam sensors/variable timing. ***
** NOTE: THIS CAM UPGRADE MAY REQUIRE THE IDLE RPM BE SET TO 850 RPM TO PREVENT POSSIBLE STALLING AT IDLE. If idle cannot be increased, a reflash or other modifications may be necessary to get a firm idle.
*** Will NOT work on the 2005-2006 VQ35DE Rev up motor with the exhaust cam sensors/variable timing. ***
Last edited by the3kgt2; Jul 11, 2014 at 10:55 AM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Sharif@Forged
Forced Induction
41
Aug 31, 2006 05:41 AM
OCG35Coupe
Engine & Drivetrain
18
May 23, 2006 10:18 PM
OCG35Coupe
Intake Exhaust
2
May 23, 2006 06:41 AM