blue LED conversion, '06
sorry to get off topic here but I saw you LED masters. Any chance you would check out my thread about resistors to answer a question?
https://my350z.com/forum/exterior-an...ml#post6915371
https://my350z.com/forum/exterior-an...ml#post6915371
He has a DIY about the conversion... Hope that helps. Good luck. Hope you are good with small leds and all that....
part numbers for blue LEDs for 03 - 05 are
LB T67C-P2R1-35-Z you will need 8 of these
QTLP610CEBTR you will need 12 of these
both available at www.mouser.com
Should be easy enough to find other colors if desired
LB T67C-P2R1-35-Z you will need 8 of these
QTLP610CEBTR you will need 12 of these
both available at www.mouser.com
Should be easy enough to find other colors if desired
For 06 you would need only 4 of the LB T67C-PRR1-35-Z
and 9 (3 for each ****) of the smaller 0603 package which you can find get using the link below
Per LEDMODs comment earlier, the smaller 0603's are harder to work with but with the right equipment and skill level, not impossible.
http://www.mouser.com/Search/Product...1lwthlLHo83OSA
I've started a full DIY that covers the door handles, the AC controls, the center console gauges, the steering wheel gauges (including blinker indicators) as well as the hazard signal switch, dash alarm LED and rear hatch light.
The door handles and AC controls sections are already posted. I expect to post the center console section later today and the other sections next weekend as I still have some parts on order.
BUT, my post is only for 03 - 05. The other difference on the AC controls, besides the different LED's, is that the control ***** are soldered to the board, not screwed in.
Here's the link to my post. When I get all the sections done, I'll have the mods clean it up and move it to the DIY section. Meanwhile, the first two sections are available in PDF if you PM me.
https://my350z.com/forum/exterior-an...e-out-kit.html
and 9 (3 for each ****) of the smaller 0603 package which you can find get using the link below
Per LEDMODs comment earlier, the smaller 0603's are harder to work with but with the right equipment and skill level, not impossible.
http://www.mouser.com/Search/Product...1lwthlLHo83OSA
I've started a full DIY that covers the door handles, the AC controls, the center console gauges, the steering wheel gauges (including blinker indicators) as well as the hazard signal switch, dash alarm LED and rear hatch light.
The door handles and AC controls sections are already posted. I expect to post the center console section later today and the other sections next weekend as I still have some parts on order.
BUT, my post is only for 03 - 05. The other difference on the AC controls, besides the different LED's, is that the control ***** are soldered to the board, not screwed in.
Here's the link to my post. When I get all the sections done, I'll have the mods clean it up and move it to the DIY section. Meanwhile, the first two sections are available in PDF if you PM me.
https://my350z.com/forum/exterior-an...e-out-kit.html
Thread
Thread Starter
Forum
Replies
Last Post




