Harness Bar interest
#62
Registered User
iTrader: (4)
Join Date: Apr 2005
Location: Biloxi, MS
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
Ok, since I do have a BCR bar installed. Perhaps my input will get you guys a better product in the end. The tie-rods are to prevent the bar from rotating forward in the event of a crash. Because the bar was designed to maintiain full reclining if you so choose to; the bar is offset of the primary mounting points (upper seat belt bolts). But this in-turn gives leverage on the bar and could rotate it.
The other thing to keep in concideration is the seat belt helper on the 05+. The BCR was not designed with these in mind. As it stands I had to remove the adjustabllity of the seat belt helpers to provide clearance on both sides, to install the bar.
As for finishes, the BCR is powder coated.
I'm not a BCR "fan boy" by any means, I hope Tech can create a far superior version that will suit everyone of all years, at a lower price point.
The other thing to keep in concideration is the seat belt helper on the 05+. The BCR was not designed with these in mind. As it stands I had to remove the adjustabllity of the seat belt helpers to provide clearance on both sides, to install the bar.
As for finishes, the BCR is powder coated.
I'm not a BCR "fan boy" by any means, I hope Tech can create a far superior version that will suit everyone of all years, at a lower price point.
Last edited by techcontrol; 04-19-2007 at 03:35 PM.
#63
Registered User
Thread Starter
iTrader: (154)
Join Date: Jun 2003
Location: Hills of Anaheim
Posts: 10,735
Likes: 0
Received 0 Likes
on
0 Posts
My goal is to make a good product with a lower cost. Since it seems that most want the rear struts, then that's the way that I will go about the design. This will ultimately add more to the cost. I have no idea of cost yet, so don't even ask. I like elements of all the bars out there so far, but none are perfect IMO.
Since I am using an 03 for the design, I can't really go about designing around the other years. I am assuming that those with the seat belt holders on the newer years aren't as worried about having them if they are putting a harness bar in the car, but that's just me. I know the Sparco bar will still work with the seat belt holders in the newer cars, so I will take that into consideration. Please be patient (although I already know that Jon is itching for this). Hopefully I will have the design model narrowed down by end of next week.
Since I am using an 03 for the design, I can't really go about designing around the other years. I am assuming that those with the seat belt holders on the newer years aren't as worried about having them if they are putting a harness bar in the car, but that's just me. I know the Sparco bar will still work with the seat belt holders in the newer cars, so I will take that into consideration. Please be patient (although I already know that Jon is itching for this). Hopefully I will have the design model narrowed down by end of next week.
#64
Registered User
iTrader: (1)
Join Date: Apr 2005
Location: Iowa
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
I would be interested also, I think it would be cool to incorporate a way to attach a camera to the bar. It seems like a good spot to hold a camera, I don't really know though because I haven't seen a harness bar in person.
#65
Registered User
iTrader: (68)
Join Date: Jul 2005
Location: Oceanside, CA
Posts: 2,443
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by philude
1. kwiker <---gets the first one...in PINK
2. z-u-later BLACK
3. Zspectrum[Redline red] Does anyone make red harness's? Sparco?
4. Drift_corners
5. MI 35th
6. ReV74
7. philude - Takata green =)
8. TayTaythatsme04 GOLD
9.
10.
Get idea Matt, cant wait to see what you come up with
T
1. kwiker <---gets the first one...in PINK
2. z-u-later BLACK
3. Zspectrum[Redline red] Does anyone make red harness's? Sparco?
4. Drift_corners
5. MI 35th
6. ReV74
7. philude - Takata green =)
8. TayTaythatsme04 GOLD
9.
10.
Get idea Matt, cant wait to see what you come up with
T
#66
Registered User
Thread Starter
iTrader: (154)
Join Date: Jun 2003
Location: Hills of Anaheim
Posts: 10,735
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by streetd
I would be interested also, I think it would be cool to incorporate a way to attach a camera to the bar. It seems like a good spot to hold a camera, I don't really know though because I haven't seen a harness bar in person.
#67
Registered User
Thread Starter
iTrader: (154)
Join Date: Jun 2003
Location: Hills of Anaheim
Posts: 10,735
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TayTaythatsme04
Get idea Matt, cant wait to see what you come up with
T
T
I just hope it lives up to mine and everyone else's expectations. I'm not really worried about being able to make it, more worried about the cost...but we shall see.
#68
Shift_Dorifto
iTrader: (17)
Join Date: Jul 2004
Location: Plano/Frisco, TX
Posts: 3,375
Likes: 0
Received 0 Likes
on
0 Posts
^^^^ Well I'm going to buy it just b/c it is from you, i could care less what the cost is. As long as it isn't 500 bucks or looks really cheap. But I'm not worried, just excited to see it done, I'm sure it is going to come out great.
#69
Registered User
Thread Starter
iTrader: (154)
Join Date: Jun 2003
Location: Hills of Anaheim
Posts: 10,735
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by kwiker
^^^^ Well I'm going to buy it just b/c it is from you, i could care less what the cost is. As long as it isn't 500 bucks or looks really cheap. But I'm not worried, just excited to see it done, I'm sure it is going to come out great.
#70
Registered User
Join Date: Jul 2006
Location: Saint Jacob, IL
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by philude
1. kwiker <---gets the first one...in PINK
2. z-u-later BLACK
3. Zspectrum[Redline red] Does anyone make red harness's? Sparco?
4. Drift_corners
5. MI 35th
6. ReV74
7. philude - Takata green =)
8. TayTaythatsme04 GOLD
9. Seifyr - Color to be determined
10.
And I agree with kwiker, if it looks good and price isnt too bad would rather support a Z member!
1. kwiker <---gets the first one...in PINK
2. z-u-later BLACK
3. Zspectrum[Redline red] Does anyone make red harness's? Sparco?
4. Drift_corners
5. MI 35th
6. ReV74
7. philude - Takata green =)
8. TayTaythatsme04 GOLD
9. Seifyr - Color to be determined
10.
And I agree with kwiker, if it looks good and price isnt too bad would rather support a Z member!
#71
General & Tech Senior Moderator
MY350Z.COM
MY350Z.COM
iTrader: (74)
1. kwiker <---gets the first one...in PINK
2. z-u-later BLACK
3. Zspectrum[Redline red] Does anyone make red harness's? Sparco?
4. Drift_corners
5. MI 35th
6. ReV74
7. philude - Takata green =)
8. TayTaythatsme04 GOLD
9. Seifyr - Color to be determined
10. NA&CH (Maybe Ill do a Advan Gold ) No Pink
2. z-u-later BLACK
3. Zspectrum[Redline red] Does anyone make red harness's? Sparco?
4. Drift_corners
5. MI 35th
6. ReV74
7. philude - Takata green =)
8. TayTaythatsme04 GOLD
9. Seifyr - Color to be determined
10. NA&CH (Maybe Ill do a Advan Gold ) No Pink
#73
Registered User
Thread Starter
iTrader: (154)
Join Date: Jun 2003
Location: Hills of Anaheim
Posts: 10,735
Likes: 0
Received 0 Likes
on
0 Posts
Just an FYI color wise...I plan to offer them painted with the color of your choice. The catch to that is that it has to be a color made. Asking for Top Secret gold or Takata green isn't going to happen unless you can provide the paint mixture info.
#74
Shift_Dorifto
iTrader: (17)
Join Date: Jul 2004
Location: Plano/Frisco, TX
Posts: 3,375
Likes: 0
Received 0 Likes
on
0 Posts
crap...not only do you have to ask to use Top Secret gold...it is like a lung and a liver per pint. I might just go with a matte black...would you be able to powder coat for durability?
#75
Registered User
iTrader: (19)
Join Date: Oct 2004
Location: northern va
Posts: 1,567
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by THE TECH
Just an FYI color wise...I plan to offer them painted with the color of your choice. The catch to that is that it has to be a color made. Asking for Top Secret gold or Takata green isn't going to happen unless you can provide the paint mixture info.
#76
Registered User
Thread Starter
iTrader: (154)
Join Date: Jun 2003
Location: Hills of Anaheim
Posts: 10,735
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by kwiker
crap...not only do you have to ask to use Top Secret gold...it is like a lung and a liver per pint. I might just go with a matte black...would you be able to powder coat for durability?
#77
Registered User
Thread Starter
iTrader: (154)
Join Date: Jun 2003
Location: Hills of Anaheim
Posts: 10,735
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by philude
i guess any shade of gold, bronze, flat black or even just bare metal would do the trick. i'm looking more for an affordable solution so if paint is driving the price up, than i can worry about that down the road after i get it. for right now, i just need the harness bar.
#79
350Z-holic
iTrader: (113)
1. kwiker <---gets the first one...in PINK
2. z-u-later BLACK
3. Zspectrum[Redline red] Does anyone make red harness's? Sparco?
4. Drift_corners
5. MI 35th
6. ReV74
7. philude - Takata green =)
8. TayTaythatsme04 GOLD
9. Seifyr - Color to be determined
10. NA&CH (Maybe Ill do a Advan Gold ) No Pink
11. USN HM 350Z - Stainless
2. z-u-later BLACK
3. Zspectrum[Redline red] Does anyone make red harness's? Sparco?
4. Drift_corners
5. MI 35th
6. ReV74
7. philude - Takata green =)
8. TayTaythatsme04 GOLD
9. Seifyr - Color to be determined
10. NA&CH (Maybe Ill do a Advan Gold ) No Pink
11. USN HM 350Z - Stainless
#80
Registered User
iTrader: (22)
Join Date: Dec 2006
Location: Irvine
Posts: 1,638
Likes: 0
Received 0 Likes
on
0 Posts
1. kwiker <---gets the first one...in PINK
2. z-u-later BLACK
3. Zspectrum[Redline red] Does anyone make red harness's? Sparco?
4. Drift_corners
5. MI 35th
6. ReV74
7. philude - Takata green =)
8. TayTaythatsme04 GOLD
9. Seifyr - Color to be determined
10. NA&CH (Maybe Ill do a Advan Gold ) No Pink
11. USN HM 350Z - Stainless
12. jimmyloose - flat mo'fukin black.
2. z-u-later BLACK
3. Zspectrum[Redline red] Does anyone make red harness's? Sparco?
4. Drift_corners
5. MI 35th
6. ReV74
7. philude - Takata green =)
8. TayTaythatsme04 GOLD
9. Seifyr - Color to be determined
10. NA&CH (Maybe Ill do a Advan Gold ) No Pink
11. USN HM 350Z - Stainless
12. jimmyloose - flat mo'fukin black.