Harness Bar interest
#101
Registered User
iTrader: (2)
I am interested in this. The struts are definitely required to properly dump forward harness loads into the car, otherwise the harness bar cross tube has to be too big (read: TOO HEAVY), to react the load into the existing seat belt bolts. Dark metallic finish or black is fine. Good luck on this project and I hope it comes to fruition at a good price.
cheers,
ChinaClipper
cheers,
ChinaClipper
#104
Registered User
Join Date: Jun 2003
Location: New Bern, NC
Posts: 3,604
Likes: 0
Received 0 Likes
on
0 Posts
How did I miss this party!?!
You all would be better served with a larger diameter bar that runs straight across from the seatbelt anchors. When the bar is offset to allow for seat reclining, if you're in a rearward impact, and the seat back fails, your head and neck are vulnerable to impact the harness bar, causing severe injury or death.
Better to lose the ability to recline the seat and have the bar stop the seat back across the shoulders.
(Of course, this is assuming you all are comfortable with using harnesses in a car without roll-over protection other than the roof)
You all would be better served with a larger diameter bar that runs straight across from the seatbelt anchors. When the bar is offset to allow for seat reclining, if you're in a rearward impact, and the seat back fails, your head and neck are vulnerable to impact the harness bar, causing severe injury or death.
Better to lose the ability to recline the seat and have the bar stop the seat back across the shoulders.
(Of course, this is assuming you all are comfortable with using harnesses in a car without roll-over protection other than the roof)
#105
Shift_Dorifto
iTrader: (17)
Join Date: Jul 2004
Location: Plano/Frisco, TX
Posts: 3,375
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Stack
How did I miss this party!?!
You all would be better served with a larger diameter bar that runs straight across from the seatbelt anchors. When the bar is offset to allow for seat reclining, if you're in a rearward impact, and the seat back fails, your head and neck are vulnerable to impact the harness bar, causing severe injury or death.
Better to lose the ability to recline the seat and have the bar stop the seat back across the shoulders.
(Of course, this is assuming you all are comfortable with using harnesses in a car without roll-over protection other than the roof)
You all would be better served with a larger diameter bar that runs straight across from the seatbelt anchors. When the bar is offset to allow for seat reclining, if you're in a rearward impact, and the seat back fails, your head and neck are vulnerable to impact the harness bar, causing severe injury or death.
Better to lose the ability to recline the seat and have the bar stop the seat back across the shoulders.
(Of course, this is assuming you all are comfortable with using harnesses in a car without roll-over protection other than the roof)
#112
350Z-holic
iTrader: (15)
1. kwiker matte black...maybe gold if i decide to buy the gold top secret shift konb...then i'll mail it to Matt for matching
2. z-u-later BLACK
3. Zspectrum[Redline red] Does anyone make red harness's? Sparco?
4. Drift_corners
5. MI 35th
6. ReV74
7. philude - gold
8. TayTaythatsme04 GOLD
9. Seifyr - Color to be determined
10. NA&CH (Maybe Ill do a Advan Gold ) No Pink
11. USN HM 350Z - Stainless
12. jimmyloose - flat black.
13. some noob.... idrmofs7-black[/quote]
14. Fluid1-flat black.
15. z4lif3 polished or red (not sure)
16. Armitage - Black
2. z-u-later BLACK
3. Zspectrum[Redline red] Does anyone make red harness's? Sparco?
4. Drift_corners
5. MI 35th
6. ReV74
7. philude - gold
8. TayTaythatsme04 GOLD
9. Seifyr - Color to be determined
10. NA&CH (Maybe Ill do a Advan Gold ) No Pink
11. USN HM 350Z - Stainless
12. jimmyloose - flat black.
13. some noob.... idrmofs7-black[/quote]
14. Fluid1-flat black.
15. z4lif3 polished or red (not sure)
16. Armitage - Black
#115
Registered User
iTrader: (19)
Originally Posted by Armitage
1. kwiker matte black
2. z-u-later BLACK
3. Zspectrum[Redline red]
4. Drift_corners
5. MI 35th
6. ReV74
7. philude - gold
8. TayTaythatsme04 GOLD
9. Seifyr - Color to be determined
10. NA&CH (Maybe Ill do a Advan Gold ) No Pink
11. jimmyloose - flat black.
12. some noob.... idrmofs7-black
13. Fluid1-flat black.
14. z4lif3 polished or red (not sure)
15. Armitage - Black
2. z-u-later BLACK
3. Zspectrum[Redline red]
4. Drift_corners
5. MI 35th
6. ReV74
7. philude - gold
8. TayTaythatsme04 GOLD
9. Seifyr - Color to be determined
10. NA&CH (Maybe Ill do a Advan Gold ) No Pink
11. jimmyloose - flat black.
12. some noob.... idrmofs7-black
13. Fluid1-flat black.
14. z4lif3 polished or red (not sure)
15. Armitage - Black
#117
Registered User
Thread Starter
iTrader: (154)
Join Date: Jun 2003
Location: Hills of Anaheim
Posts: 10,735
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Fluid1
Where's this concrete news you were speaking of, Tech?
#119
Registered User
Thread Starter
iTrader: (154)
Join Date: Jun 2003
Location: Hills of Anaheim
Posts: 10,735
Likes: 0
Received 0 Likes
on
0 Posts
Just got off the phone. Things are rolling (albeit not as quickly as I had initially hoped). I hope to have some close to firm prices available this week. I can't say when I can promise pics that I know everyone wants. I appreciate everyone being patient. I'm doing all that I can to get this done and get it done at a reasonable price.
Thanks!!
Thanks!!