No more ugly keyfob! Pics inside. =)
12-26-2007 | 03:50 AM
#44
Originally Posted by Lawy'dU
who makes the RX-8 genius? lol
12-26-2007 | 06:42 PM
#48
Originally Posted by Silverstone-Z
I actually implemented my key fob into my head and to work with my mind. Now I just have to "think" the doors to unlock and they do.
12-27-2007 | 02:59 PM
#49
Originally Posted by SuperBlack350z
not prettier than mine 
Would it be possible for the immobilizer chip to work with the Z's as well? Or just the keyfob functionality?
also, does Nissan sell the spare key inserts as pictured above seperately? (edit, nvm. You can get the key insert as a blank)
Last edited by Z Tuned; 12-27-2007 at 03:01 PM.
01-22-2008 | 05:28 PM
#51
Registered User
Joined: Sep 2007
Posts: 219
Likes: 0
From: Florida
Originally Posted by Arnold K.
06GCoupin: That's cool and all, but some people enjoy a quick fix. Most people don't have sandpaper and spray paint handy, anyways.
01-22-2008 | 05:30 PM
#52
Registered User
Joined: Sep 2007
Posts: 219
Likes: 0
From: Florida
Originally Posted by Silverstone-Z
I actually implemented my key fob into my head and to work with my mind. Now I just have to "think" the doors to unlock and they do.
01-22-2008 | 05:32 PM
#53
Registered User
Joined: Sep 2007
Posts: 219
Likes: 0
From: Florida
Originally Posted by 2004Black350z
Lol i was just sayin that bc im in a Mazda rental car haha. Instead of just sayin 1 car i thought it was better 2 say the manufacturer
anyway, im think the best thing to do is take apart the fob (check the manual) and spray the shell with krylon fusion. ima do mine this weekend. i will post pics then.
01-22-2008 | 06:34 PM
#54
Originally Posted by bremboboy
so does this key fob work?
Last edited by bremboboy; 01-22-2008 at 06:37 PM.
01-28-2008 | 04:22 PM
#59
Originally Posted by Get_Zwole
somebody needs to do this to Z keys the mazda with the key inside etc. id def. pay to have this done and im sure others would too 
.
.I did it. It was pain in the @$$. Worse thing about this DIY is that the quality of the RX8 keyfob just terrible. I ordered it from ebay, and seems like its a cheap knock off from China... folding key is very loose... So, the key jiggles and feels very sloppy. So, I went out and got another all-in-one jack knife keyfob. This is for Korean vehicles, but the order of the buttons are exactly the same as the 350z keyfob and the height is very similar. So, I only had to shave off like 1/16th of an inch of the chip board(?) instead of chopping the half of the board. It also has the metal trims and key is held in very firmly. I still had to add buttons and do some wiring jobs just like the RX8 DIY though...
Last edited by leeboyNY; 01-28-2008 at 05:35 PM.
01-28-2008 | 06:09 PM
#60
Originally Posted by leeboyNY
I did it. It was pain in the @$$. Worse thing about this DIY is that the quality of the RX8 keyfob just terrible. I ordered it from ebay, and seems like its a cheap knock off from China... folding key is very loose... So, the key jiggles and feels very sloppy. So, I went out and got another all-in-one jack knife keyfob. This is for Korean vehicles, but the order of the buttons are exactly the same as the 350z keyfob and the height is very similar. So, I only had to shave off like 1/16th of an inch of the chip board(?) instead of chopping the half of the board. It also has the metal trims and key is held in very firmly. I still had to add buttons and do some wiring jobs just like the RX8 DIY though...
That looks pretty good. I like it better than the mazda one. I bought an Audi Fob on Ebay for 20 bucks and I'm working on that.