08 hood and front bumber on 03
Thread Starter
Registered User
iTrader: (8)
Joined: Feb 2003
Posts: 404
Likes: 0
From: Killeen, Texas
The title says it all. Does the 08 hood and front bumper fit an 03 with no modification? Don't flame please! I think the 08 hood looks like my 77 datsun Z with the power bulge.
Trending Topics
Originally Posted by NateZ08
that would be like buying a old school 318i and then putting M3 badge on it.
The hood is what seperates the HR's from DE's. Fail imo
The hood is what seperates the HR's from DE's. Fail imo
Afraid he's gonna steal your shine?? Relax, not like you're driving a GT-R. Both driving 350z's, yours just has a different engine.
Both work, but with the front bumper the fender wells or whatever don't match
up exactly, so you will either want to get those too or do a little extra work to
keep your 03" fender wells from flapping around.
up exactly, so you will either want to get those too or do a little extra work to
keep your 03" fender wells from flapping around.
Originally Posted by 350ZYALATA
Afraid he's gonna steal your shine?? Relax, not like you're driving a GT-R. Both driving 350z's, yours just has a different engine.
Thread Starter
Registered User
iTrader: (8)
Joined: Feb 2003
Posts: 404
Likes: 0
From: Killeen, Texas
Good god....that's alot of hate. I'm not buying the hood to fool someone that there is a HR in there. I like the look and it looks like my datsun Z. It's not like i'm putting a GT-R badge on the back. You act like the HR is to the 350z like the type R is to the Honda boys. Get over your HR, it's just a Z engine.
Originally Posted by 350ZYALATA
Afraid he's gonna steal your shine?? Relax, not like you're driving a GT-R. Both driving 350z's, yours just has a different engine.
EXACTLY !!!
I wish I can give you rep! hehe!
Originally Posted by CSODeputy
what is a DE and HR?
is there much difference in engines of the 03 vs the 08?
is there much difference in engines of the 03 vs the 08?
I have been beefing about the stupid wheel well liners.
If you're a perfectionist, which most of "us" are - you
will be bothered by the bleh fitment. This is similar to
the issues you will have with a V2 on same 03-05 cars.
These liners are two part and way overpriced. All four
major plastic parts are approx. $500. That said I don't
think I've seen an 03-05 car with liners replaced, so final
fitment may still suck.
L
If you're a perfectionist, which most of "us" are - you
will be bothered by the bleh fitment. This is similar to
the issues you will have with a V2 on same 03-05 cars.
These liners are two part and way overpriced. All four
major plastic parts are approx. $500. That said I don't
think I've seen an 03-05 car with liners replaced, so final
fitment may still suck.
L
Does anybody know if a Stillen supercharger will fit on an 03-05 Z with an 07-08 hood? It doesn't look like it will, especially on the far side of the hood near the windshield, but just thought I would ask if anyone knew for sure.
Originally Posted by NateZ08
that would be like buying a old school 318i and then putting M3 badge on it.
The hood is what seperates the HR's from DE's. Fail imo
The hood is what seperates the HR's from DE's. Fail imo
I'm sure the new Z's are sweet (never driven one though), but c'mon man, it's not THAT different
Yes, they will both fit.
The bumper may have fender liner issues, such as the 03-05 liner being too short for the 08 bumper. There's probably a way around this, but I dont have the personal experience to say so.
The bumper may have fender liner issues, such as the 03-05 liner being too short for the 08 bumper. There's probably a way around this, but I dont have the personal experience to say so.
Thread
Thread Starter
Forum
Replies
Last Post
ars88
Zs & Gs For Sale
18
Apr 4, 2016 07:52 AM








