horizontal headlamp/ headlight adjustment
#1
Registered User
Thread Starter
Join Date: Mar 2004
Location: Kimberley
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
horizontal headlamp/ headlight adjustment
hi
i've searched but don't seem to find result in title
i have already adjusted my headlamps / headlights up to the desired level
however, when i take sharp/ 90-degree turns, i turn into darkness as there is not enough light - i need to adjust the beams horizontally
kindly advise how to do so
TIA
i've searched but don't seem to find result in title
i have already adjusted my headlamps / headlights up to the desired level
however, when i take sharp/ 90-degree turns, i turn into darkness as there is not enough light - i need to adjust the beams horizontally
kindly advise how to do so
TIA
#2
Registered User
iTrader: (15)
Join Date: Nov 2003
Location: Clarksville, Tennessee
Posts: 6,612
Likes: 0
Received 1 Like
on
1 Post
you know that by adjusting them up you threw off your side view, so basically you created your own problem. my suggestion is to set them back to within specs and your problem should go away. also oncoming traffic will thank you as well.
#4
Registered User
iTrader: (15)
Join Date: Nov 2003
Location: Clarksville, Tennessee
Posts: 6,612
Likes: 0
Received 1 Like
on
1 Post
not really sure if that is supposed to be a sarcastic reply or a honest one, but what i posted is true. unless you know what you are doing and have the proper tools, your headlight aim will always be off.
#5
Registered User
Thread Starter
Join Date: Mar 2004
Location: Kimberley
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
clever
they are within spec - originally, they were too low - something which i'm sure you must have read that lotsa people are complaining about
i've even considered fitting spot lamps angled out but would like to first try and adjust them sideways
(there's others also asked same question on other forums without replies)
so, if you know how to do that, kindly let me know
they are within spec - originally, they were too low - something which i'm sure you must have read that lotsa people are complaining about
i've even considered fitting spot lamps angled out but would like to first try and adjust them sideways
(there's others also asked same question on other forums without replies)
so, if you know how to do that, kindly let me know
#7
Registered User
iTrader: (15)
Join Date: Nov 2003
Location: Clarksville, Tennessee
Posts: 6,612
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by redlude97
How were they too low to start with? How did you measure it and make sure its within DOT specs?
from the way he is talking, i think he has no clue to what you are even saying at all.
Trending Topics
#12
New Member
iTrader: (78)
Thread
Thread Starter
Forum
Replies
Last Post
2003, 2008, 350z, adjust, adjusted, adjusting, adjustment, cutoff, head, headlight, headlights, horizontal, horizontally, light, nissan