When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
How on Earth do you take the button assembly off the cubby hole door. I have everything apart, the door in my hand but I can't get the button off the door. Or the sheet metal bracket at the top of the door off either but it doesn't look like it comes off.
Any help would be greatly appreciated so I can wrap this up tonight!
Got, thanks for the help again Somebody.
All is wrapped and looks fairy good, there is a bumpy spot from balled up glue and the odd spot with small wrinkles but it looks great, I can't wait to put it back in the car.
how do u guy remove the gauge cluster? any tips? guide?
fairly easy... pop out the top.. i used no tools just my hands to pop it out then be carefull not to go all the way on pulling it up... then u can see its held down by screws.. just use a long screwdriver wrap the metal part of sd with electric tape so you wont short anything .. theres a bare electrical stuff close to the screws so be careful , to remove 4 screws and your good pretty simple actually ... just take your time..
You can use it, thats what i used and have used on the few other cars i've done this for. The Key is to not spray it on the fabric.
Even after it is sprayed on the fabric, let the fabric come back to room temperature and it will be fine. 3M adhesives will not eat through Neffy Wrap.