Carbon Fiber Vinyl Pattern Wrap Thread
#282
Registered User
iTrader: (48)
https://my350z.com/forum/7112278-post208.html
#283
Registered User
iTrader: (24)
Join Date: Nov 2005
Location: So. Cal. 626
Posts: 548
Likes: 0
Received 0 Likes
on
0 Posts
how does this material hold up against the sun? during the hot summer cali days, I will have a sun visor to reflect the sunlight away, but it will still be pretty hot inside the car, if I leave the car parked under the sun. does this material fade fairly easily? does the glue damage the dash pieces if it was removed later?
#284
Registered User
iTrader: (48)
how does this material hold up against the sun? during the hot summer cali days, I will have a sun visor to reflect the sunlight away, but it will still be pretty hot inside the car, if I leave the car parked under the sun. does this material fade fairly easily? does the glue damage the dash pieces if it was removed later?
#290
Registered User
iTrader: (4)
The top piece comes right off, but you have to be careful because the LED boards on both sides (that light up the light dimmer/ odometer reset) needs to be taken off. You have to be careful with the screwdriver. Use electric tape for the shaft on the screwdriver so you don't short anything.
#292
Registered User
iTrader: (34)
Join Date: Mar 2007
Location: oklahoma city
Posts: 7,908
Likes: 0
Received 0 Likes
on
0 Posts
that looks great man ^^^
I wanna do the entire center, the a pillars, and door switch covers i think that will look great. I might have to buy double the amount of fabric though haha im prob gonna have to do it a couple times to get it right.
I wanna do the entire center, the a pillars, and door switch covers i think that will look great. I might have to buy double the amount of fabric though haha im prob gonna have to do it a couple times to get it right.
#293
Registered User
iTrader: (48)
how did you guys took out the top piece of the speedometer?
Here is a pic of how my top part above the gauges look like now. Mine you that I have 5% tint all around, temp outside is nice and chilly 50 degree and a lil warm inside the car. Imagine that in the summer time.
I will take mine off this weekend and get some strong 3M spray. Might try 3M 90 to see how it will hold up in the sun.
Here is a pic of how my top part above the gauges look like now. Mine you that I have 5% tint all around, temp outside is nice and chilly 50 degree and a lil warm inside the car. Imagine that in the summer time.
I will take mine off this weekend and get some strong 3M spray. Might try 3M 90 to see how it will hold up in the sun.
#299
Registered User
iTrader: (1)
Join Date: Nov 2006
Location: New York
Posts: 668
Likes: 0
Received 0 Likes
on
0 Posts
I just want to say that i ordered this fabric last night from SOMEBODY and he is great to deal with. very quick with replies, and a nice guy. ill add pics when it comes in and done in my car.