Spoiler Questions
#1
Registered User
Thread Starter
Join Date: Jun 2009
Location: illinois
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Spoiler Questions
Hello , have a question on spoilers I have been searching, has anyone bought one of the quick install with 3M tape only ones and have it last?
They are selling these for $209.00 Painted and shipped!!
I have the bug, new toy and cant leave it alone.........
http://www.carid.com/product.php?pro...t=39426&page=1
They are selling these for $209.00 Painted and shipped!!
I have the bug, new toy and cant leave it alone.........
http://www.carid.com/product.php?pro...t=39426&page=1
#3
OEM spoiler from factory is attached via 3m tape, and two bolts/nuts.
the bolt/nuts are not necessary and if the surface is prepped prior to installation you should have no problems with just using 3m.
prep as in alcohol wipe down, remove all wax and pressed on and clamped after the adhesion has been made.
the bolt/nuts are not necessary and if the surface is prepped prior to installation you should have no problems with just using 3m.
prep as in alcohol wipe down, remove all wax and pressed on and clamped after the adhesion has been made.
#4
Registered User
iTrader: (32)
Join Date: Sep 2008
Location: Behind you, with a spoon
Posts: 3,928
Likes: 0
Received 0 Likes
on
0 Posts
chebosto, how long do you have to clamp the spoiler for? with c-clamps and some padding i presume?
i actually order one, not this particular on but it's also held on with 3m tape. just want to know before i install it after it arrives.
thanks.
i actually order one, not this particular on but it's also held on with 3m tape. just want to know before i install it after it arrives.
thanks.
#5
Registered User
Thread Starter
Join Date: Jun 2009
Location: illinois
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
AAlso
Does anyone know if there is the soft plexy one out there, pre painted?
and what about a silicone seal around it when done??
Thanks for understanding ( i am new )
and what about a silicone seal around it when done??
Thanks for understanding ( i am new )
#6
you dont have to clamp it on very long.. what you can do is put the spoiler on, and run/stretch painters tape over the entire OEM wing and extend onto the hatch to keep the ends down.
if you have non-marring C clamps, i'm sure that would hold too. there isnt that much force on the rear spoiler during driving so yo dont need to have it crazy bolted on... no need for silicone seal.
if you have non-marring C clamps, i'm sure that would hold too. there isnt that much force on the rear spoiler during driving so yo dont need to have it crazy bolted on... no need for silicone seal.
Trending Topics
#16
Registered User
iTrader: (9)
i do like the stillen V1, though, and i might just get it over the Blitz...it flows well with the car and the Nismo v2 front thats heading my way.
Im not a big fan of spoilers, though, and most likely i wont get one unless needing it to pull off my final kit.
DO not get the one you showed above, that thing is horrid.
#17
New Member
iTrader: (24)
Join Date: Dec 2008
Location: Greensboro, NC
Posts: 2,910
Likes: 0
Received 0 Likes
on
0 Posts
OEM spoiler from factory is attached via 3m tape, and two bolts/nuts.
the bolt/nuts are not necessary and if the surface is prepped prior to installation you should have no problems with just using 3m.
prep as in alcohol wipe down, remove all wax and pressed on and clamped after the adhesion has been made.
the bolt/nuts are not necessary and if the surface is prepped prior to installation you should have no problems with just using 3m.
prep as in alcohol wipe down, remove all wax and pressed on and clamped after the adhesion has been made.
#19
350Z-holic
iTrader: (60)
Join Date: Jan 2006
Location: San Antonio/I miss DFW, TX
Posts: 11,204
Likes: 0
Received 29 Likes
on
20 Posts
i dunno, but I'm a semi-fan of the celica spoiler - 7th gen..
https://my350z.com/forum/attachments...z-dsc00018.jpg
https://my350z.com/forum/1296601-post18.html
-J
https://my350z.com/forum/attachments...z-dsc00018.jpg
https://my350z.com/forum/1296601-post18.html
-J
#20
Registered User
Thread Starter
Join Date: Jun 2009
Location: illinois
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Just for you Jason
This is the Day after Desert Storm, Almost never made it back from that one
We were using a Loaner that day, gave it back in bad shape,
I flew out of Davis/Monthon AFB
hence on my plane you will see the DM on the tail
this was the Battle Creek Plane
the seats are actually more comfy than the 350Z also
We were using a Loaner that day, gave it back in bad shape,
I flew out of Davis/Monthon AFB
hence on my plane you will see the DM on the tail
this was the Battle Creek Plane
the seats are actually more comfy than the 350Z also