Pikes Peak owners needed
#1
Registered User
Thread Starter
Join Date: Feb 2003
Location: VA
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Just wondering if anyone has noticed any discoloration on the top of the front bumper where the hood and bumper meet? I have noticed some yellowish discoloration. I am assuming it's from the rubber seal around the hood where it lays on the bumper. It is only visible if you raise the hood but IMO it should not be happening.
#2
Registered User
Join Date: Nov 2002
Location: Massachusetts
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I definately have that discoloration you are talking about...looks nasty. I have assumed that i could rub it out with some compound since it isn't visible with the hood open. Havn't tried yet though. Just looked at it tonight when I cleaned my car. I'll try rubbing it out tomorrow.
Mike
Mike
#4
Registered User
Join Date: Mar 2003
Location: Cincinnati
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
yea I starting to get that. I also noticed if yo look real close. little brown spots, there tiny, but there. And my gas door doenst match either. Nissan Paint sucks ***. And the front bumper chips WAY to easy.
#6
Registered User
Join Date: Feb 2003
Location: Nashville, TN
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I've had my PPW Roadster about two months & noticed yellowing near the sill plates on the plastic when you open the doors. It doesn't come out. I went over the entire body (external)with Maguire's three stage (cleaner, polish, and wax) and followed it up with Crystal Guard & have had no problems on those areas.
The combination of the Maguires & the Crystal Guard seems to have really brought out the metal flake, looks great in the sun.
The combination of the Maguires & the Crystal Guard seems to have really brought out the metal flake, looks great in the sun.
#7
Registered User
Thread Starter
Join Date: Feb 2003
Location: VA
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
So did the yellow stains come out?
Chas...so you really think CG is worth it? Did you apply it yourself or have it done professionaly?
Chas...so you really think CG is worth it? Did you apply it yourself or have it done professionaly?
Last edited by waderw24; 10-08-2003 at 03:38 PM.
Trending Topics
#8
Registered User
Join Date: Feb 2003
Location: Nashville, TN
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
unfortunately the yellow stains didn't come out. Luckily they're in a place that can't be seen, unless you're really looking for them.
The CG really enhanced the Maguires stage 2&3. When I used it by itself, I didn't see a whole lot of improvement. I just applied it myself. If you get it, definitely follw the directions exactly!...I screwed up on one application of it & it streaked the paint pretty bad! If that happens, just rinse the car & use a clean chamois to dry it.
The CG really enhanced the Maguires stage 2&3. When I used it by itself, I didn't see a whole lot of improvement. I just applied it myself. If you get it, definitely follw the directions exactly!...I screwed up on one application of it & it streaked the paint pretty bad! If that happens, just rinse the car & use a clean chamois to dry it.
Thread
Thread Starter
Forum
Replies
Last Post
liqalu04
Engine & Drivetrain
31
01-02-2022 12:58 PM