the "bmccann101s car gets a new look/ watch me suffer bodywork hell" thread
#1681
What's that GTmat like smell wise?
A friend of mine did his Audi with some cheapo sound deadener but that car was a windows down ordeal from then on. And given that we live in Sweden that wasn't really an option so it had to come out which wasn't the most fun.
Will I be able to retain my "new" car smell after the initial "break in" period of this one or what do you reckon?
A friend of mine did his Audi with some cheapo sound deadener but that car was a windows down ordeal from then on. And given that we live in Sweden that wasn't really an option so it had to come out which wasn't the most fun.
Will I be able to retain my "new" car smell after the initial "break in" period of this one or what do you reckon?
#1684
350Z-holic
Thread Starter
iTrader: (16)
Join Date: Aug 2006
Location: Scottsdale/coyote drophouse
Posts: 8,215
Received 400 Likes
on
227 Posts
What's that GTmat like smell wise?
A friend of mine did his Audi with some cheapo sound deadener but that car was a windows down ordeal from then on. And given that we live in Sweden that wasn't really an option so it had to come out which wasn't the most fun.
Will I be able to retain my "new" car smell after the initial "break in" period of this one or what do you reckon?
A friend of mine did his Audi with some cheapo sound deadener but that car was a windows down ordeal from then on. And given that we live in Sweden that wasn't really an option so it had to come out which wasn't the most fun.
Will I be able to retain my "new" car smell after the initial "break in" period of this one or what do you reckon?
#1685
350Z-holic
Thread Starter
iTrader: (16)
Join Date: Aug 2006
Location: Scottsdale/coyote drophouse
Posts: 8,215
Received 400 Likes
on
227 Posts
obviously is NOT the overall design, but just wanted to conceptualize what a wheel-matching satin blue bar is going to wind up like back here.. a la GT3 Club sport.
More than likely, the cross bars will be across the back and not the front... leaving more space under the harness bar.
More than likely, the cross bars will be across the back and not the front... leaving more space under the harness bar.
Last edited by bmccann101; 12-21-2016 at 09:57 AM.
#1687
General & Tech Moderator
MY350Z.COM
MY350Z.COM
Nice! Capacity?
#1690
General & Tech Moderator
MY350Z.COM
MY350Z.COM
Good stuff, Brian. You always select the most top shelf products!
The following users liked this post:
bmccann101 (01-01-2017)
#1691
350Z-holic
Thread Starter
iTrader: (16)
Join Date: Aug 2006
Location: Scottsdale/coyote drophouse
Posts: 8,215
Received 400 Likes
on
227 Posts
so here I sit and wait.
There's a large show that my car is featured in coming up on the 16th. Its a booth car for the event itself, and they are a very legit local media company, so im sitting here dying inside waiting and waiting.. but rest assured that 1/17/17 is my green light to install EVERYTHING.
Expect a flood of updates soon.
Happy new year, f#ckers.
There's a large show that my car is featured in coming up on the 16th. Its a booth car for the event itself, and they are a very legit local media company, so im sitting here dying inside waiting and waiting.. but rest assured that 1/17/17 is my green light to install EVERYTHING.
Expect a flood of updates soon.
Happy new year, f#ckers.
The following users liked this post:
bmccann101 (01-05-2017)
#1696
350Z-holic
Thread Starter
iTrader: (16)
Join Date: Aug 2006
Location: Scottsdale/coyote drophouse
Posts: 8,215
Received 400 Likes
on
227 Posts
NEW WALBRO 485 pump installed, also got the coil packs in.. car runs once more..
Looks like the pump was fine, but the splice into the oem wiring under the hanger was bad.. oh well, is what it is.
Last car show is on 1/16... car goes up on jacks 1/17.... we start installing EVERYTHING finally.
Looks like the pump was fine, but the splice into the oem wiring under the hanger was bad.. oh well, is what it is.
Last car show is on 1/16... car goes up on jacks 1/17.... we start installing EVERYTHING finally.
#1697
350Z-holic
Thread Starter
iTrader: (16)
Join Date: Aug 2006
Location: Scottsdale/coyote drophouse
Posts: 8,215
Received 400 Likes
on
227 Posts
cars actually still f#cked haha.. didn't even make the show yesterday..
all I can think of it that it starts to lop[e and bog out and the AFR shoots to super rich.. 10-10.;5 etc.. thusly, I bought a revised Engine Coolant temp switch today and we shall see.. but drum roll... The car is going up on jack stands in an hour and were tearing this fawker down tonight So many beautiful parts ready to roll, including the wheels.. oh how I cannot wait.
all I can think of it that it starts to lop[e and bog out and the AFR shoots to super rich.. 10-10.;5 etc.. thusly, I bought a revised Engine Coolant temp switch today and we shall see.. but drum roll... The car is going up on jack stands in an hour and were tearing this fawker down tonight So many beautiful parts ready to roll, including the wheels.. oh how I cannot wait.
The following users liked this post:
bmccann101 (01-17-2017)