Parking Lamp Relay
#1
Registered User
Thread Starter
Parking Lamp Relay
I am working on a 2006 coupe with lighting issues (to say the least). The previous owner had done some wiring of lights that I am trying to undo. I now have headlights (low and High), and turn signals left and right, front and rear. However, now I am having difficulty with the parking lights. I have checked fuses 71 and 78 in the ipdm-er, as well as fuses 1,6 and 18 on the J/B, and all are good (tested with a test light while plugged in the sockets). In addition, the fusible link F appears to be intact. However, I have no parking lights or tail lights. The fsm refers to the parking light relay, but I cannot find it in any diagrams or layout pictures. Does anyone know where it is? The headlights and high beams relays "click". I hear no click when turning on the parking lights, so I cannot find it. Could it be on the backside of the ipdm-er?
Any help would be appreciated.
Any help would be appreciated.
#2
New Member
iTrader: (6)
CAUTION: None of the IPDM E/R-integrated relays can be removed.
SYSTEMS CONTROLLED BY IPDM E/R
1. Lamp control
Using CAN communication line, it receives signal from BCM and controls the following lamps:
● Headlamps (Hi, Lo)
● Parking lamps
● Tail lamps
● License plate lamps
SYSTEMS CONTROLLED BY IPDM E/R
1. Lamp control
Using CAN communication line, it receives signal from BCM and controls the following lamps:
● Headlamps (Hi, Lo)
● Parking lamps
● Tail lamps
● License plate lamps
#5
Registered User
Thread Starter
So today I removed the IPDM E/R and there it was soldered to the board. Anyone have an old IPDM that I could scavenge a relay off of or know a place I can get a Taico YTB1 - 225L relay? I can see physical damage to the relay - melted out the side.
The following users liked this post:
jv350z (10-16-2018)
#7
New Member
An on-line search will probably reveal several sources for your relay. I believe the manufacturer's name is spelled Taiko.
Trending Topics
#8
Registered User
Thread Starter
Pictures of IPDM
I removed the white plastic cover from the IPDM. There are five relays soldered to the board. The relay that is bad is seen in the second photo. Found some online but they ship from China and will take 4-6 weeks. Was hoping to find one sooner. I am sure there is an equivalent from another manufacturer but I cannot find the tech specs for the Taiko. Even worse, I am sure these get thrown away every week at the Nissan dealership every time they replace one of these things. Need to get my hands on one of those!
The following users liked this post:
jv350z (10-17-2018)
Thread
Thread Starter
Forum
Replies
Last Post