My drivers side needs a new window regulator. It’s an 03 350z and years ago I had the dealer so the TSB for the grease streak. Ever since then the drivers side window has seemed a little loose. By that I mean when the door is opened the motor actuates the drop but the window doesn’t go down the correct amount. It’s loose enough that with light pressure it moves to the correct location. The window also rattles a bit if it’s down and the door is closed. Any advice on how to fix it? I’m not sure if it’s loose bolts for the window or if the felt piece installed at the time of the TSB is worn.

Thanks for the advice,
NzZ

 

Take off door panel and look

/thread