Hello everyone... I had installed my fuel system and tuned a customers car to 6.5 psi... but trying to get this E01 setup on the street is a pain... I suspect the crappy single solenoid to be inadequate for trying to properly regulate such low boost within a couple tenths of a psi accuracy.

Manual mode is a complete disaster, I can get it to act perfectly with the exception of hardcore overboost during rapid on/off throttle situations such as if your letting off and on during wheel spin... this i cannot allow.

Auto mode I have played with for probably 20 min driving around but I dont have all the time in the world to play with this thing so I was wondering if any of you guys are running 6.5 psi and if so what are your settings?

I have tried it several different ways but it seems like I can only consistently get like 5.5-6 psi with it going up and down the whole time or I can get 7-7.5 psi... have trouble getting inbetween... personally not a fan of this boost controller!!! Dual Solenoid all the way!!!

Thanks,
Charles

 

no help from me charles... but another question..
i was never able to successfully set "auto mode" on my e-01...sharif talked me through it...the damn light just kept blinking...it never set though..any ideas...anyone???

TODD

 

Drive it like you stole it.

 

hahaha... i always did! (excepy when it blew--i was actually not on it hard when it gave way)

 

im not sure what you meant by the light was blinking?

 

When you start the Auto mode the AUTO light will blink until the boost is set, I also cannot get it to work for me, I tried for 6 psi and actually got the light to stop blinking but then the boost would go to 7+

 

These boost controllers were never designed to increase boost 1psi from base. Just not going to happen very accurately. I was able to get pretty close...but there was still a .5 PSI fluctuation in auto mode.

The main benifit of the e-01 is its intergration with the eManage...I wouldnt use any other boost controller with the eManage...it would be pointless.

 

so with the 11.7 or whatever psi tial wastegate spring...if i tune my car to 15 psi, auto mode should set easily?

TODD

 

ok how about just let me know what u guys have your gain set at or around. Dont even care if ur running 6.5 psi just want to know the general idea. Thanks James