eManage Ulimate--Almost here..and MUCH IMPROVED!
11-29-2005, 07:17 AM
#601
Registered User
iTrader: (2)
Join Date: Nov 2004
Location: Texas
Posts: 1,172
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Sharif@Forged
I dont have the 750cc injectors on the website, but they are also $550. Drop me an email or PM if you need them. THANKS!
11-29-2005, 08:33 AM
#602
just curious at what point you are starting the a/f target map. i had mine set at 0% throttle and to come on at 40degrees celcius and the a/f target map with figures input all the way from idle on up to redline. my a/f has been right on in every condition i have had the car so far, but i have only about 70 miles on my car now in good running condition. i have yet to see any changes in my ij map. i have all the rest of the feedback settings set to the middle point.
i have been up to about 12 psi so far (very quickly) and was at 11.5 a/f. i have a 1to1 raising rate fuel press reg, but am finding it hard to believe the stock fuel map is keeping up with this if the a/f target map has made no changes yet. any more info?
i have been up to about 12 psi so far (very quickly) and was at 11.5 a/f. i have a 1to1 raising rate fuel press reg, but am finding it hard to believe the stock fuel map is keeping up with this if the a/f target map has made no changes yet. any more info?
11-29-2005, 08:40 AM
#603
also, my throttle responce has been feeling a little "soggy". i am guessing it is because of cutting back the maf signal. any one else felt this condition? i am going to try and get as much of the injector signal cut from the ij scaling map as i can to see if keeping the maf signal as close to stock as possible will help this.
all attemps at tuning before has been futile, but now the car has the right cam timing, the tuning part is becoming alot easier, lol. looks as though the eu will control 660 injectors with no prob.
all attemps at tuning before has been futile, but now the car has the right cam timing, the tuning part is becoming alot easier, lol. looks as though the eu will control 660 injectors with no prob.
12-02-2005, 09:42 AM
#609
Registered User
iTrader: (1)
Join Date: Dec 2003
Location: Houston
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
I am using 1.09 and all is working right now. I have a problem with idling but I was not sure if it’s because of the head work & cams. What are the issues you have see with 1.09?
12-02-2005, 08:49 PM
#612
Registered User
iTrader: (8)
Join Date: Jul 2004
Location: Bellevue, Ne
Posts: 2,386
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Sharif@Forged
Stick to 1.08.....apparently 1.09 doesnt work on the VQ35.
Take it with a grain of salt though my EU has been hitting the crack pipe to much.
If interested check it out https://my350z.com/forum/showthread....7&page=1&pp=20
It's definately a head scratcher.
01-04-2006, 06:47 PM
#614
Registered User
iTrader: (1)
Join Date: Oct 2003
Location: Tucson, AZ
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Alright you wimps...I finally got everything up an running again and successfully extended the limiter using the ignition wire inputs. It wasn't as easy as I thought, since I had to use the Add Injector map when the RLC map cut out. It works on the VQ30DEK at least for a couple hundred extra RPM. I don't have a WB02 yet and the holidays had 5-0 breathing down my neck, so I didn't push it too far and until I steal another laptop, I won't be anytime soon.
http://forums.maxima.org/showthread....09#post4607509
Anybody with access to a dyno for numerous 3rd gear pulls(2nd on the street varies load too much IMO) and a WB02 should definitely give it a try. With your guys crank input for precise RPM input, I'm sure it will be much simpler to nail down the RPM load points.
Anyways, good luck....
http://forums.maxima.org/showthread....09#post4607509
Anybody with access to a dyno for numerous 3rd gear pulls(2nd on the street varies load too much IMO) and a WB02 should definitely give it a try. With your guys crank input for precise RPM input, I'm sure it will be much simpler to nail down the RPM load points.
Anyways, good luck....
Originally Posted by roncfpz
So the "wimps" want to know, have you successfully raised the rev limit using the EU to 7100rpms?
Ron
Ron
01-04-2006, 08:21 PM
#615
Originally Posted by kcobean
Hey guys. I'm going to "unstick" this thread since the title is a bit stale and the EU is now well into the market. Just an FYI.
01-05-2006, 09:02 AM
#617
LOL..you are guys are funny. Yes, the rev limit increase works on the EU, but as you said, its a little tricky. You have to extnd the IPW's beyond when the stock ECU cuts the fuel.
It's a lot easier to do this on a UTEC.
It's a lot easier to do this on a UTEC.
01-05-2006, 05:52 PM
#618
Registered User
iTrader: (1)
Join Date: Oct 2003
Location: Tucson, AZ
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
It didn't work for me using IPW, only duration.
Do you have any logs showing what happens to ignition timing past the stock fuel cut?
Do you have any logs showing what happens to ignition timing past the stock fuel cut?
Originally Posted by Sharif@Forged
LOL..you are guys are funny. Yes, the rev limit increase works on the EU, but as you said, its a little tricky. You have to extnd the IPW's beyond when the stock ECU cuts the fuel.
It's a lot easier to do this on a UTEC.
It's a lot easier to do this on a UTEC.
01-15-2006, 03:39 PM
#620
Originally Posted by ARLETOS 350Z
So,has anyone done it,increase the rev limit on a N/A with stock injectors?and has anyone cut the stock speed limit?
