Hello Everyone!

I was wondering if the 350Z TT (realistically) with the right components can accelerate 0-62 mph s: 3.7? If it is possible what else I need (my components APSTT, APS Tallboy, APS exhaust, APS TEST pipes and Volk GT-7 19 wheels)

Thanks
Cesar
350Z APS TT

 

"built Motor" And "lots" Of Boost!

 

You can do it with what you have except get 18inch rims and some fat tires..

 

a big +1....

Lighter, fatter rims and tires will do it. I suspect you'd be in the low 4's right now.....

 

Good clutch, tons of traction, quick shifts, and lots of practice

 

what about a suspension wise?

 

If he's stock he should be fine..if he put spings in then it's going to be harder to hook up...

 

It depends how you want to classify 0-60mph. On the drag strip or on the street using street radials.

If you were to use Drag radials set your suspension to soft if you had an adjustible coil over, maybe raising your revs to 6900 or 7k. You should be able to. Also some of us thats gone to the drag strip and use a drag radial and used the calculation have gotten that much of a time.

 

0-60 is the stupidest measurement of a car's quickness. It is 50% determined by the tires on the car.

Tub the rear end ... that'll do it

 

i say we worry more about top end and shoot for 200+

 

slick should get you their easily

 

400-430whp driven well with slicks or DR's will get you high 3's 0-60, but like mentioned its a stupid #...