Well after all the trials we finally finished yesterday. Recently I had the Scott Performance stage 2 cams installed.... BEST CAMS OUT THERE, hit boost sooner, make power all the way through, also gained 40hp. So recently car went in for the Apexi Avcr boost controller, step one colder plugs, and cams. Previously I was running 483.6whp at 15psi. Now I am making 524RWHP and 517RWTQ at 16 PSI!!!!!!!! Also excellent power graphs very linear. I gotta say the Turbonetics T66 turbo is pretty much maxed out at those numbers there graph says it flows 600hp and its pretty much maxed out. Thats the only thing that held us back. But I am sticking with the turbo unless some on wants to buy it from me lol. Car hauls *** plain and simple.
Also the Turbonetics Intercooler is very SMALL. If you want bigger numbers you need at least a t76, and a bigger intercooler.


http://www.putfile.com/d350z

There are two videos there first two title 525rwhp and 517rwtq

 

all i can say is damn!!!!!!!!! meaning holy chit.

 

Congratulations on the numbers

 

Looking good! Congrats! Did you have a different set of cams before switching to the SP's? Also you say they make power all the way through, but the graph shows the power starting to drop just after 5000 RPMS?????

 

Crappy *** Stock cams lol

 

edited my post. read again.

 

My bad I forgot to mention, he let off at 6300 and then did it again it hits 524 then levels off when he took it to 7000 it leveled off at 510ish im getting more dyno charts.

 

good job! bet it feels great to drive.

 

Ok. Now get out from in front of your computer and go enjoy that beast!

 

Damn that turbo lags. I made 300ft/lbs @ 3000rpm, your 215ish, did he go WOT that far down or no? Id like to see some track times. Congrats on getting it running though, very unique set-up...

 

BTW-Your not really a stage 2.5 your more of a one off custom snail on an otherwise stock kit-besides your Crawford manifolds. Not to put you down but Im pretty sure the stage 2 will do better numbers than you. I want some street driving vids!

 

Yes this is my own custom kit, I doubt it will because my turbo is maxed lol the t66 they are putting in also. Also the crawford headers gave me alot of power.

 

A T66 is good for around 730hp IIRC-Im sure eventually MIAPLAYA will chime in and corect me You sure you dont have a 62-1?

 

Glad someone else backs me up about scott's perfrmance cams. they are definately monster cams. been telling people about these sticks for months. all you hear people talking about is JWT, Tomei, blah, blah, blah. Nice numbers homie!!!!!!!!!

 

No It was a t62 but they changed it because they sent the wrong one. The turbo matrix states 600hp for the bbt66. And i have a t66. Trust me the car was running perfect, other than it was hot yesterday and the turbo was close to being maxed out lol. I wanted to take it up to 20psi but my tunner told me your turbo and intercooler wont handle it.

 

what intercooler options do you have to go bigger? Do you plan on going bigger intercooler?

 

omg dillon you look like a skinny version of me.

 

Great numbers! Is there just one version of SP cams? I assume TF did the tune?

 

Yes I am planning on a bigger intercooler and turbo but later down the road.
Tuning Factory did the tune, Dan the fukhead. Terrible shop

 

congrats man. Good to see someone taking the ST further.