Part II Forged Performance Does It Again (Pics and Dyno)!!!!
Originally Posted by MRC Motorsports
we tried playing with the ramp rates, however the car breaks loose on the dyno when we try to hold it back from ramping as fast..We have the thing strapped to thre hilts and it comes halfway out of the rollers....If we run 120-130 ramp rate the tires chew up at 5000-8000 rpms..
We generally run my car at 150 ramp rate to get a full clean run with no slip..
We generally run my car at 150 ramp rate to get a full clean run with no slip..Live on the edge, Julian...the car should be attempting to climb those front rollers. Double strap that thing down, and let it rip.
I have always prefered a looser strap, so the tire has a better chance of climbing and biting into that front roller. Either way...you are doing the right thing...as ramp rates dont make much of a difference in peak whp.
We have run 680rwhp (DD numbers) with a 4.3L 350z at 180 ramp rate and haven't had any problems on 19s. Deflate the tires, strap the car down, then inflate them again. But you are probably already doing that. Just a friendly reminder 
Originally Posted by MRC Motorsports
we tried playing with the ramp rates, however the car breaks loose on the dyno when we try to hold it back from ramping as fast..We have the thing strapped to thre hilts and it comes halfway out of the rollers....If we run 120-130 ramp rate the tires chew up at 5000-8000 rpms.. We generally run my car at 150 ramp rate to get a full clean run with no slip..
We generally run my car at 150 ramp rate to get a full clean run with no slip..
Here is the OP's dyno video. He sent it to me to make a quick clip, enjoy....
http://www.we-todd-did-racing.com/we...EzZGZkMzF5NTQx
http://www.we-todd-did-racing.com/we...EzZGZkMzF5NTQx
Originally Posted by Alberto
Here is the OP's dyno video. He sent it to me to make a quick clip, enjoy....
http://www.we-todd-did-racing.com/we...EzZGZkMzF5NTQx
http://www.we-todd-did-racing.com/we...EzZGZkMzF5NTQx
Originally Posted by Philthy
Nice clip... so - do you guys use straps? j/k
hehe..with our strapping system , we do all the strapping from the rear of the dyno, and its really easy, and very secure. The car is actually supposed to come slightly off the center line of the dyno, and ride up a little bit on the front roller. If you look closely, you can actually see the car rock forward slightly, and then back after I let off. This is the correct way to strap down and measure power on the DD.
Originally Posted by doug
I observe alot on this forum.. doesn't mean i am attacking anyone..
what i observe?
I notice that everytime a APS Kit breaks... Chimmike, Craig, yourself and a couple other TN owners jump in and say something..
I notice that everytime a TN Kit breaks... Zivman jumps in and says something..
what i observe?
I notice that everytime a APS Kit breaks... Chimmike, Craig, yourself and a couple other TN owners jump in and say something..
I notice that everytime a TN Kit breaks... Zivman jumps in and says something..
You forgot about me having a nervous breakdown and screaming "I am never boosting my car!!!!!!!!!!!!" every time anything brakes...
I feel left out...
Registered User
Joined: May 2006
Posts: 402
Likes: 0
From: Sydney, Australia
im gonna jump into the dyno debate.
Do u guys know that dyno dynamics modifies dyno outputs for each market it supplies too.. Ring and australian branch (head office) and american branch and ask why your numbers dont compare to those oversea's.
In australia, 375whp will run 119-120mph.
Do u guys know that dyno dynamics modifies dyno outputs for each market it supplies too.. Ring and australian branch (head office) and american branch and ask why your numbers dont compare to those oversea's.
In australia, 375whp will run 119-120mph.
Originally Posted by gringott
Seems to be the BOV of choice for the PE. I have it also. Like it. It became much louder with a vented hood.
Thread Starter
Joined: May 2005
Posts: 3,307
Likes: 0
From: Fayetteville, NC
Originally Posted by BrokeZ
I too have the PE/HKS SSV combo. I think the sound of it was really wussy and high pitched. I was able to find some different fin inserts to change the sound at my local shop. Sounds alot better, it has a more traditional sound. They have a purple fin, and gold fin. I used the purple because after looking at the gold fin, it looks identical to the stock silver one. It was a fun 20$ mod.
How about aound clip!
