Teaser Pics - Performance Factory Built APS TT
#1
Thread Starter
Registered User
iTrader: (25)
Joined: Oct 2003
Posts: 2,864
Likes: 0
From: Orlando, FL
Teaser Pics - Performance Factory Built APS TT
Some have you knew about my build in progress, thought I'd post some pictures and info of whats going on.
List of things being done:
APS Twin Turbo Kit
Pauter Billet Forged Rod Set 350Z w/ARP rod bolts
Arias Zero Silicon AL EXTREME Duty Piston set 9.0:1
Darton Mid Sleeve VQ35
ARP VQ35 Main Stud Kit
ARP ½ inch Head Studs
HKS Head Gasket
Powdercoated Timing Cover Gloss Black
Venair Blue Coolant Hoses
JWT C2 Camshafts (springs/shims)
RC 750cc Injectors
CJM Stage 2 Return Fuel System
Koyo Radiator
TurboXS UTEC
Dual HKS SSQV BOV
Forge Motorsports Wastegate Actuators
Blitz SBC Id Boost Control
HKS DLI
Carbonetics Triple Disc Carbon Clutch 1350kg Pressure Plate (ATS)
SS Teflon Clutch Line
There has been a few bumps in the road, but Jeremy @ Performance Factory has done nothing but help assist and take care of the problems completely and has qualities you don't find in many shops.
Heres the block sent to us from Todd @ Built Z Motors.
I should have more pictures soon and dyno numbers.
List of things being done:
APS Twin Turbo Kit
Pauter Billet Forged Rod Set 350Z w/ARP rod bolts
Arias Zero Silicon AL EXTREME Duty Piston set 9.0:1
Darton Mid Sleeve VQ35
ARP VQ35 Main Stud Kit
ARP ½ inch Head Studs
HKS Head Gasket
Powdercoated Timing Cover Gloss Black
Venair Blue Coolant Hoses
JWT C2 Camshafts (springs/shims)
RC 750cc Injectors
CJM Stage 2 Return Fuel System
Koyo Radiator
TurboXS UTEC
Dual HKS SSQV BOV
Forge Motorsports Wastegate Actuators
Blitz SBC Id Boost Control
HKS DLI
Carbonetics Triple Disc Carbon Clutch 1350kg Pressure Plate (ATS)
SS Teflon Clutch Line
There has been a few bumps in the road, but Jeremy @ Performance Factory has done nothing but help assist and take care of the problems completely and has qualities you don't find in many shops.
Heres the block sent to us from Todd @ Built Z Motors.
I should have more pictures soon and dyno numbers.
Trending Topics
#13
Thread Starter
Registered User
iTrader: (25)
Joined: Oct 2003
Posts: 2,864
Likes: 0
From: Orlando, FL
Originally Posted by skidmarq
Is Jeremy tuning the UTEC as well? What made you choose the UTEC over the FCON Pro at your assumed power levels, out of curiosity?
As you know, you have to be a HKS PRO dealer to tune and sell the FCON unit.
The UTEC should be fine, I know jeremy is going to tune it as safe as he can, he knows that software very well. We'll just have to see how much the UTEC can give me. If I can just get close or hit about 600rwhp on the UTEC on pump 93 I'll be a happy camper.
#15
Thread Starter
Registered User
iTrader: (25)
Joined: Oct 2003
Posts: 2,864
Likes: 0
From: Orlando, FL
Originally Posted by skidmarq
Then I am definitely going to stay tuned for this one! Can't wait for the finished product and numbers
Are you planning on running multiple maps?
Are you planning on running multiple maps?
Yea for now low boost map and high boost map. Maybe later one a race gas map.
#16
The problem with the UTEC isn't making power, you can make power with just about any decent EMS, but rather its about drive-ability, transition into boost, being able to drive like OEM at partial boost, etc. Don't get me wrong the UTEC is a good unit, there are a few things we don't like about it but the way it controls timing is better than say a unichip or emanage, BUT it is not to be compared to say a AEM, Vpro, or MoTeC EMS.
Can't wait to see your results I am sure Jeremy will do a great job!
-George
GT Motorsports
Can't wait to see your results I am sure Jeremy will do a great job!
-George
GT Motorsports
#17
Thread Starter
Registered User
iTrader: (25)
Joined: Oct 2003
Posts: 2,864
Likes: 0
From: Orlando, FL
Originally Posted by George@GTM
The problem with the UTEC isn't making power, you can make power with just about any decent EMS, but rather its about drive-ability, transition into boost, being able to drive like OEM at partial boost, etc. Don't get me wrong the UTEC is a good unit, there are a few things we don't like about it but the way it controls timing is better than say a unichip or emanage, BUT it is not to be compared to say a AEM, Vpro, or MoTeC EMS.
Can't wait to see your results I am sure Jeremy will do a great job!
-George
GT Motorsports
Can't wait to see your results I am sure Jeremy will do a great job!
-George
GT Motorsports
#18
Originally Posted by maximumsportZ
Thanks for the kind words George. The closest Vpro tuner would be Sharif only a state away. Maybe if Mr. Sharif can get me a good pricing on the Fcon and tune I might just make a trip up there in the near future.
Suck it up; spend the needed money and get a proper EMS for your application
#19
Thread Starter
Registered User
iTrader: (25)
Joined: Oct 2003
Posts: 2,864
Likes: 0
From: Orlando, FL
Originally Posted by Zivman
For that build, you are cutting corners by not running the Fcon. You are looking at 18 lbs of boost with a Utec that has limited resolution. Like George says, I am sure you will hit the big HP, but getting to that point might be jerky and with a few hiccups.
Suck it up; spend the needed money and get a proper EMS for your application
Suck it up; spend the needed money and get a proper EMS for your application
You've told me this 100 times in IM!!!
Lets not make this into a UTEC Vs. Fcon debate we all know how much you love fighting.
#20
Cant wait to see what it does after you got it all tuned and ready to go. Im sure there will be some good videos comeing are way very soon =D I cant wait to hear the dual HKS BOVs should sound sweet.