Turbo guys, with 3.3 fd got a few questions
Allright, I have found a guy to trade pumpkins, but I have an 03 touring and he has an 05 enth., I checked his car out today, super clean, low mileage, but I noticed that my car has VDC and his has TCS? Are these interchangeable, or should my search continue?
I appreciate all the help in advance.
Craig
I appreciate all the help in advance.
Craig
So, just trying to save the labor bill, do both have the limited slip from factory? These may not be the smartest questions, but just curious.
Do you have the final drive on your car?
Craig
Do you have the final drive on your car?
Craig
all the autos to my knowledge have the stock LSD. The only one that doesn't have the LSD is the base 6 speed model.
The 5AT diff housing is physically a little smaller than the 6MT's. And because of that, you won't be able to just put in any aftermarket LSD you want - if that was something you were considering down the road. I know cusco makes a 5AT and 6MT version of their LSD's. I think there might be another company or two that makes ones that fit the 5AT.
The 5AT diff housing is physically a little smaller than the 6MT's. And because of that, you won't be able to just put in any aftermarket LSD you want - if that was something you were considering down the road. I know cusco makes a 5AT and 6MT version of their LSD's. I think there might be another company or two that makes ones that fit the 5AT.
Trending Topics
Originally Posted by Sharif@Forged
+1...it will work. Most aftermarket LSD's will not with the 3.3 Final Drives...Quiafe is the exception. Good luck!
Originally Posted by JDMFairlady21
nice let us know how it turns out man.
Craig
In regards to diffs, I think Cusco has a LSD that works with the 3.357 + VLSD. Quaife is designed as a drop-in for the 3.357 + Open.
None of the 6MT diffs work with a 5AT because the 3.357 ring gear is 10mm thicker than the 3.538.
FYI, the complete pumpkin is about 100 lbs.
None of the 6MT diffs work with a 5AT because the 3.357 ring gear is 10mm thicker than the 3.538.
FYI, the complete pumpkin is about 100 lbs.
Just make sure you have a deep socket 17mm for the bolt on the back of the diff, I didnt know it took one when i first pulled mine out so i had to drive around town to diffrent friends houses to find one. Was the only damn socket i didnt have. lol.
Thread
Thread Starter
Forum
Replies
Last Post
bcoffee20
Zs & Gs For Sale
5
Nov 19, 2015 06:39 PM
Vigman
Maintenance & Repair
17
Nov 17, 2015 04:34 AM






